ViewSonic Installation Guide for Your New VP201b Monitor

Quick Installation

1 Connect power cord

2 Connect video cable

•Make sure both the LCD display and computer are turned OFF

•Remove rear panel covers if necessary

•Connect the video cable from the LCD display to the computer

4 Wizard CD (continued)

(1) Wait for the CD-ROM to auto-start.

NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in the Windows Explorer, then double-click on viewsonic.exe.

(2) Follow the on-screen instructions.

Macintosh users: Models older than G3	5 Windows users: Set the timing
require a Macintosh adapter. Attach the	mode (resolution and refresh
adapter to the computer and plug the video	rate)
cable into the adapter.
	Example: 1600 x 1200 @ 60 Hz.
To order a ViewSonic® Macintosh adapter,
	For instructions on changing the resolution
contact ViewSonic Customer Support.
3 Turn ON LCD Display and	and refresh rate, see the graphic card’s user
	guide.
computer
	Installation is complete. Enjoy your new
Turn ON the LCD display, then turn
	ViewSonic, LCD display.
ON the computer. This sequence (LCD display	To be best prepared for any future customer
before computer) is important.
	service needs: print this user guide and write
NOTE: Windows users may receive a
	the serial number in “For Your Records” on
message asking them to install the INF file.	page 2. (See back of LCD display.)
This is on the CD.	You can register your product online at the
4 Insert the ViewSonic Wizard CD
	website for your region. See the Customer
into the computer’s CD drive.	Support table in this guide.
Follow the on-screen instructions.	The ViewSonic Wizard CD-ROM also
If your computer does not have a CD-ROM	provides an opportunity for you to print the
	registration form which you may mail or fax
drive, see “Customer Support.”
	to ViewSonic.

USB	AC IN
D-SUB	Power Switch
DVI-A/DVI-D

Power cord

AC outlet	Computer
(wall socket)
	power cord

ViewSonic VP201b/VP201s 4