JBL EON15 manual Controls, Mix/Loop, Lf Eq, Hf Eq

Page 8

22376 JBL EON15-GA Guide 9/17/02 12:30 PM Page 9

MIX/LOOP

This switch selects the source of the signal for the OUT connector.

CAUTION: Before adjusting this switch, be certain to set the input level control of any equipment connected to this output to its minimum gain (least sensitive) setting.

•In the disengaged position, only the signal from the INPUT 1 connector is routed directly to the OUT connector. Changing the other settings on the audio panel will not effect the OUT signal. The INPUT 2 and INPUT 3 inputs will not be present at the OUT connector.

Use this setting when you want to feed multiple EON powered speakers the same signal.

LOOP / MIX OUT

MIX/LOOP

(Shown in “MIX” Position)

INPUT 1

EQ

TO INTERNAL

AMPLIFIERS

 

 

 

 

1

 

 

 

LF

HF

 

2

2

 

 

 

 

 

 

3

 

 

3

 

 

 

•In the MIX position (depressed), a post-EQ blend of all inputs to the speaker (INPUT 1,

2, and 3) will be sent to the OUT connector. Any changes to input level settings or EQ will affect the OUT signal. See the SYSTEM EXAMPLES section for details on how this mode may be used.

Controls

INPUT 1

Adjusts the level of INPUT 1. Use this control to match the input sensitivity of the EON15 G2 to the output level of the mixer, microphone, or instrument connected to INPUT 1. It is a common misconception that this control changes the power of a system. Your EON15 G2 will produce its rated output power no matter where this control is set. The INPUT 1 control determines how much signal is required at the input in order to drive the system to full output.

INPUT 2 & INPUT 3

These controls adjust the level of the inputs connected to INPUTS 2 and 3.

LF EQ

This control allows up to 15 dB of cut or boost at 120 Hz. If the system seems too “boomy” or bass heavy, rotate this control counter clock-wise. If the system sounds too “thin” or lacks low-end power, rotate this control clock-wise. To set the low-frequency EQ to “flat” (no EQ cut or boost), set this control to the center detented position.

HF EQ

This control allows up to 15 dB of cut or boost at 5k Hz. If the system seems too “strident” or “tinny”, rotate this control counter clock-wise. If the system sounds too “dark” or lacks “brilliance”, rotate this control clock-wise. To set the high-frequency EQ to “flat” (no EQ cut or boost), set this control to the center detented position.

9

Page 7 Page 9
Image 8
Page 7 Page 9
Contents EON15 G2 User’s Guide Contents Welcome Electrical Safety FeaturesAbout the EON15 G2 Stand MountingSpecifications Frequency ResponseAvailable Accessories QuickstartControls and Connections ConnectorsSwitches Controls MIX/LOOPLF EQ HF EQIndicators Fuse ReplacementVoltage Selection and Fuses Changing VoltageApplication Examples Basic Sound Reinforcement System with Stage MonitorsVocal / Acoustic-Electric Guitar Health Club InstructionDJ or Sound Reinforcement System with EON PowerSubs DJ System with Passive Subwoofers Keyboard Amplification and MixingTroubleshooting Move the speakers so they do Reference Connections Balanced and UnbalancedCables and Connectors Block Diagram Loudspeaker Placement and MountingJBL Limited Warranty JBL Professional Contact Information Exclusion of Certain DamagesJBL EON15-GA Guide 9/17/02 1230 PM JBL EON15-GA Guide 9/17/02 1230 PM JBL EON15-GA Guide 9/17/02 1230 PM

EON15 specifications

The JBL EON15 is a powerful and versatile portable PA system that delivers high-quality sound and impressive performance for a variety of applications. Designed for musicians, DJs, and public speakers, it is built to provide exceptional audio clarity and reliability. One of the standout features of the EON15 is its 15-inch woofer, which produces deep bass and a balanced midrange response. This woofer is complemented by a 1-inch polymer diaphragm compression driver that ensures clear, articulate high frequencies, making the EON15 suitable for both music playback and speech.

The EON15 is equipped with JBL’s advanced technology, including the patented speaker design that incorporates a built-in digital signal processor (DSP). This DSP enhances sound quality through features such as EQ, compression, and limiting, ensuring that the output is both powerful and distortion-free, even at high volumes. The system is designed for easy connectivity, featuring both XLR and TRS inputs, allowing users to connect microphones, instruments, or audio devices seamlessly.

Wireless connectivity is another significant characteristic of the EON15, especially with the addition of Bluetooth capabilities in newer models. This allows users to stream music directly from their smartphones, tablets, or laptops, adding to its convenience for live events and gatherings. The unit is also lightweight and portable, with a molded enclosure that prevents damage and provides protection during transport, making it an ideal choice for mobile applications.

The EON15 is designed for versatility, offering a range of applications from small gigs to larger events. It has a built-in stand mount, making it easy to set up and adjust for optimal sound dispersion. Its rugged construction ensures durability, while the integrated handles provide ease of transport.

In conclusion, the JBL EON15 is an excellent choice for anyone in need of a professional sound reinforcement system. With its powerful sound output, advanced technology, and user-friendly features, it stands out in the crowded market of portable PA systems, making it a reliable companion for performers and event organizers alike. Whether you are setting up for a small gathering or a larger performance, the JBL EON15 promises to deliver quality sound and dependable performance.
Top Page Image Contents