JBL EON15 manual Voltage Selection and Fuses, Indicators, Changing Voltage, Fuse Replacement

Page 9

22376 JBL EON15-GA Guide 9/17/02 12:30 PM Page 10

Indicators

PEAK

The PEAK LED (Light Emitting Diode) illuminates to indicate that the system is approaching clipping. The threshold for this light is actually about 2 dB below clipping. An occasional flickering of this light on the loudest peaks is acceptable. If this LED is on for more than the duration of brief dynamic peaks, the system is being overdriven. Continuously over-driving the system will result in unpleasant and fatiguing distortion and may lead to premature failure of your speaker system.

If the PEAK LED illuminates excessively:

•Reduce INPUT 1, 2, and 3.

•Reduce the output level of the mixer, musical instrument, or other source connected to the speaker.

•If there is a great deal of LF EQ or HF EQ boost, return the controls to the “flat” (centered) position.

SIGNAL

Illuminates to indicate a usable signal from INPUT 1.

MIC

This LED lights to indicate that the MIC/LINE switch is in the MIC (depressed) position.

VOLTAGE SELECTION AND FUSES

Changing Voltage

Your EON15-G2 will typically be set at the factory to accommodate the power mains voltage in your area. Before you set up your EON15-G2 for the first time it is a good idea to verify that the setting of the selector is appropriate for the power in your area. In the event that you do need to change the voltage:

•Make sure that the speaker is powered off and the AC is disconnected from the speaker..

•Directly below the male IEC connector on the speaker is a voltage selector. Break the factory-applied seal and slide the switch to the appropriate setting.

•Set the voltage selector switch to the 115V or 230V setting as required for your area.

•After having reconfirmed that the correct voltage is selected, reconnect the AC (IEC connector) and power the unit up.

DO NOT UNDER ANY CIRCUMSTANCES OPERATE THE UNIT WITH THE WRONG VOLTAGE SELECTED. DOING SO MAY RESULT IN SERIOUS DAMAGE TO YOUR SPEAKER SYSTEM WHICH WILL NOT BE COVERED BY WARRANTY.

Fuse Replacement

The EON15 G2 has no user-serviceable fuses. Failure of fuses is most frequently a symptom of problems requiring service by a competent technician.

10

Page 8 Page 10
Image 9
Page 8 Page 10
Contents EON15 G2 User’s Guide Contents Welcome Features Electrical SafetyAbout the EON15 G2 Stand MountingFrequency Response SpecificationsQuickstart Available AccessoriesConnectors SwitchesControls and Connections MIX/LOOP ControlsLF EQ HF EQFuse Replacement IndicatorsVoltage Selection and Fuses Changing VoltageBasic Sound Reinforcement System with Stage Monitors Application ExamplesHealth Club Instruction Vocal / Acoustic-Electric GuitarDJ or Sound Reinforcement System with EON PowerSubs Keyboard Amplification and Mixing DJ System with Passive SubwoofersTroubleshooting Move the speakers so they do Connections Balanced and Unbalanced ReferenceCables and Connectors Loudspeaker Placement and Mounting Block DiagramJBL Limited Warranty Exclusion of Certain Damages JBL Professional Contact InformationJBL EON15-GA Guide 9/17/02 1230 PM JBL EON15-GA Guide 9/17/02 1230 PM JBL EON15-GA Guide 9/17/02 1230 PM

EON15 specifications

The JBL EON15 is a powerful and versatile portable PA system that delivers high-quality sound and impressive performance for a variety of applications. Designed for musicians, DJs, and public speakers, it is built to provide exceptional audio clarity and reliability. One of the standout features of the EON15 is its 15-inch woofer, which produces deep bass and a balanced midrange response. This woofer is complemented by a 1-inch polymer diaphragm compression driver that ensures clear, articulate high frequencies, making the EON15 suitable for both music playback and speech.

The EON15 is equipped with JBL’s advanced technology, including the patented speaker design that incorporates a built-in digital signal processor (DSP). This DSP enhances sound quality through features such as EQ, compression, and limiting, ensuring that the output is both powerful and distortion-free, even at high volumes. The system is designed for easy connectivity, featuring both XLR and TRS inputs, allowing users to connect microphones, instruments, or audio devices seamlessly.

Wireless connectivity is another significant characteristic of the EON15, especially with the addition of Bluetooth capabilities in newer models. This allows users to stream music directly from their smartphones, tablets, or laptops, adding to its convenience for live events and gatherings. The unit is also lightweight and portable, with a molded enclosure that prevents damage and provides protection during transport, making it an ideal choice for mobile applications.

The EON15 is designed for versatility, offering a range of applications from small gigs to larger events. It has a built-in stand mount, making it easy to set up and adjust for optimal sound dispersion. Its rugged construction ensures durability, while the integrated handles provide ease of transport.

In conclusion, the JBL EON15 is an excellent choice for anyone in need of a professional sound reinforcement system. With its powerful sound output, advanced technology, and user-friendly features, it stands out in the crowded market of portable PA systems, making it a reliable companion for performers and event organizers alike. Whether you are setting up for a small gathering or a larger performance, the JBL EON15 promises to deliver quality sound and dependable performance.
Top Page Image Contents