ViewSonic VS13235 manual Managing Your Notebook’s Power, Power Management Modes

2.1 Power Management

¾Managing Your Notebook’s Power

¾Power Management Modes

¾Power Options Properties

¾Speed Step

2.1.1 Managing Your Notebook’s Power

See 7.2 Battery for more information on getting the best performance from the battery packs.

Use your notebook connected to an electrical outlet as often as possible as the battery life expectancy is affected by the number of times it is charged.

Your notebook comes with built-in power management. You can configure it through the Power Options program in the Control Panel, to sleep, hibernate, and wake according to the specific situations.

The Advanced settings can be accessed via Start > Control Panel > System and Maintenance

>Power Options.

On the Select a power plan page, click Change plan setting under the plan that you want to change.

Click Change advanced power settings. Expand the Power buttons and lid category to configure the settings.

When leaving your notebook unattended for the long period, place it in Standby or Hibernate Mode. You can exit either power management mode by pressing the Power Button.

2.1.2Power Management Modes

2.1.2.1Sleep Mode

This mode conserves power by switching off the hard drive and display after the preset period of inactivity (a time-out). When Sleep Mode is exited, your notebook will return to the same operating state it was before entering sleep.

In Sleep Mode, if your notebook loses power from both of the electrical outlet and the battery, the data in your notebook may be lost.

ViewSonic VNB141 15