13. Appendix
13-1 Troubleshooting
Q1: How to turn off the Notebook PC when the halted system cannot warm boot?
A:Press the POWER button and hold 4 or 6 seconds to turn off the Notebook PC.
Q2: How to check the Notebook PC if the Notebook PC cannot be turned off?
A:1.If the power is low, connect to the electric outlets.
2.Check that the video display system is not in the external monitor mode. 3.Make sure the indicator of the adapter turns on and the adapter works well. 4. Remove the U disk, SD card and any other external device.
Q3: If the water come into the Notebook PC
A:1. DO NOT turn on the Notebook PC.
2.Disconnect the outlet cable and detach the Battery Pack in order to turn off the Notebook PC, instead of pressing the POWER button to turn off it. Disconnect all external devices.
3.Spill out the water from the Notebook PC. Use a soft and waterish paper or cloth to wipe the surface of the Notebook PC lightly.
4.Use the fanner to dry the Notebook PC and the accessories, and then send to the service center for advice.
5.DO NOT place the Notebook PC into the dirty carrying case to again.
Q4: After entering the standby mode, why the system cannot reactivate and how to check this problem?
A:Definition:
Standby Mode: Store your current data and status in RAM, turn off the external device, but the Power Indicator Light still turns on. Press POWER button to operate the system again. Suspend Mode: The computer saves the current state of the system in RAM and switches off power to the CPU. The power indicator light flashes in this mode. Press the POWER button to restart the system.
ViewSonic VNB101 | 39 |