Manhattan Computer Products 179133 user manual Installation Windows 2000/xp, Driver Installation

installation: Windows 2000/xp

Driver Installation

Installing the device driver enables your computer’s operating system to recognize the Hi-Speed USB 2.0 DVI Converter once it’s connected. Check your operating system and refer to the appropriate installation procedure to begin installing the device driver. Make sure the converter is unplugged from your PC or notebook computer before executing the setup program.

1.Insert the driver CD into the CD-ROM drive. The setup program should be launched automatically. If the setup program does not begin automatically, go to Start, then Run, then double-click “D:\ Setup.exe” (where D: is the path of your CD-ROM drive).

2.When the Welcome screen of the InstallShield Wizard displays, click “Next” to continue.

3.When the License Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to accept the license agreement and continue with the install.

4.Connect the external display device (monitor/projector) to the DVI connector of the converter and switch the display device on.

INSTALLATION: WINDOWS 2000/XP