Lenovo MW600-B-LO user manual Important information, What’s new, Features

3)For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.

As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).

Important note: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.

The end user manual shall include all required regulatory information/warning as show in this manual.

Important information

Please read the information below before using the MW600-B-LO 11b/g wireless PCI- Express card on your system.

What’s new

The latest generation PCI (Peripheral Component Interconnect) bus architecture called PCI Express, uses a 2.5- GHz serial Input/Output structure for higher bandwidth and better scalability than its previous architectures. .

Features

•PCI Express PCIe interface.

•X1-lane 2.5Gbps PCI Express host interface, Low profile

•IEEE 802.11g compliant.

MW600-B-LO Wireless 802. 11b/g wireless PCI-E Adapter Card 3

31036026_MW600_UG_EN.indd 3

2008.11.7 10:59:27 AM