LED Indicators
The MW600-B-LO features two LED indicators: 2 LED (One is orange, another is green)
•Orange color LED:
Solid light: Indicates wireless LAN enabled and connect.
•Green color LED:
Slow Flashing: Indicates wireless LAN search AP
Fast flashing: WiFi traffic.
Introduction
Overview of the product
The adapter gives you the flexibility to install your PC in the most convenient location available, without the cost of running network cables.
The adapter’s auto-sensing capability allows high packet transfer rate of up to 54Mbps for maximum throughput, or dynamic range shifting to lower speeds due to distance or operating limitations in an environment with a lot of electromagnetic interference. It can also interoperate with all 11Mbps wireless products. Your wireless communications are protected by up to 152-bit WEP and WPA encryption for high security.
Features
Complies with IEEE802.11g, IEEE802.11b standards, Supports WPA/WPA2 data security, authentication, TKIP/AES encryption, 64/128/152-bit WEP encryption Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps wireless LAN data transfer rates. Provide 32-bit PCI E interface. Supports Ad-Hoc and Infrastructure modes Supports roaming between access points when configured in Infrastructure mode Ease to configure and provides monitoring information. Supports Windows 98SE, Me, 2000, XP, Vista Detachable reverse SMA connector antenna.
Wireless configuration methods
You can configure connections to wireless networks, known as wireless profiles, for a computer running Windows Vista with the following methods:
•Connect to a network dialog box
This is the principal method by which individual users will configure connections
MW600-B-LO Wireless 802. 11b/g wireless PCI-E Adapter Card 5
5