Lenovo 8459, 8455, 8453, 8454, 8460, 8457, 8458 Heat and product ventilation, CD and DVD drive safety

Page 11

shorten the life of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged state.

Heat and product ventilation

Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a significant amount of heat due to their compact size. Always follow these basic precautions:

vDo not leave the base of your notebook computer in contact with your lap or any part of your body for an extended period when the computer is functioning or when the battery is charging. Your computer produces some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn.

vDo not operate your computer or charge the battery near flammable materials or in explosive environments.

vVentilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover or disable these features.

You should inspect your desktop computer for dust accumulation at least once every three months. Before inspecting your computer, turn off the power and unplug the computer’s power cord from the electrical outlet; then remove any dust from vents and perforations in the bezel. If you notice external dust accumulation, you should also examine and remove dust from the inside of the computer including heat sink inlet fins, power supply vents, and fans. Always turn off and unplug the computer before opening the cover. If possible, avoid operating your computer within 2 feet of high-traffic areas. If you must operate your computer in or near a high-traffic area, you should inspect and, if necessary, clean your computer more frequently.

For your safety and to maintain optimum computer performance, always follow these basic precautions with your desktop computer:

vKeep the cover closed whenever the computer is plugged in.

vRegularly inspect the outside of the computer for dust accumulation.

vRemove dust from vents and any perforations in the bezel. More frequent cleanings might be required for computers in dusty or high-traffic areas.

vDo not restrict or block any ventilation openings.

vDo not store or operate your computer inside furniture, as this might increase the risk of overheating.

vAirflow temperatures into the computer should not exceed 35° C (95° F).

vDo not use non-desktop air filtration devices.

CD and DVD drive safety

CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically damaged, it is possible for the disc to break apart or even shatter when the CD drive is in use. To protect against possible injury due to this situation, and to reduce the risk of damage to your machine, do the following:

vAlways store CD/DVD discs in their original packaging

vAlways store CD/DVD discs out of direct sunlight and away from direct heat sources

vRemove CD/DVD discs from the computer when not in use

Important safety information

ix

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User Guide Lenovo 3000 J Series Page Lenovo 3000 J Series Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesPower cords and power adapters Batteries Extension cords and related devicesPlugs and outlets Heat and product ventilation CD and DVD drive safetyTo connect To disconnect Additional safety informationLithium battery notice Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsConnectivity Operating systems, preinstalled varies by model Available options Environment SpecificationsDimensions WeightHandling static-sensitive devices Supported operating positionsTools required Installing external options Locating connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Locating components Accessing system board components Identifying parts on the system board User Guide Microprocessor and heat sink 10 Sata IDE connectors Fan connector 11 Clear CMOS/Recovery jumper Installing memory What to do next Installing PCI adaptersSecurity features Padlock Password protectionChanging the battery Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables Using passwords Using the Setup UtilityStarting the Setup Utility program Viewing and changing settingsAdministrator or Supervisor Password Changing the startup device sequence Exiting from the Setup Utility programSelecting a startup device Selecting a temporary startup deviceUser Guide System program Updating flashing Bios from a disketteAppendix A. Updating system programs User Guide Cleaning a mouse with a ball Appendix B. Cleaning the mouseCleaning an optical mouse User Guide Basic AT commands Appendix C. Manual modem commandsInternal speaker on until carrier detected Low speaker volumeSet Pulse dial as default Set Tone Dial as defaultExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Notices Trademarks Television output noticeIndex Page Page Part Number 41T3715
Top Page Image Contents