Connecting an additional serial ATA hard disk drive
A serial hard disk drive can be connected to any available SATA connector.
1.Locate the signal cable that comes with the new drive.
2.Locate the available SATA connector on the system board. See “Identifying parts on the system board” on page 13.
3.Connect one end of the signal cable to the drive and the other to the available SATA connector on the system board.
4.Locate one of the extra
What to do next:
vTo work with another option, go to the appropriate section.
vTo complete the installation, go to “Closing the cover and connecting the cables” on page 28.
Chapter 1. Installing options 21