Note: Some models will have keyboards with a fingerprint reader. After you setup and turn on your computer, refer to the Access Help online help system for information about your fingerprint reader. See “Access Help” on page 62 for instructions on how to open the online help system.
3.Connect the USB mouse cable to a USB connector.
4.Connect the monitor cable to the monitor connector on the computer.
v If you have a Video Graphics Array (VGA) Standard monitor, connect the cable to the connector as shown.
Note: If your model has two monitor connectors, be sure to use the connector on the accelerated graphics port (AGP) adapter.
vIf you have a digital video interface (DVI) monitor, connect the cable to the connector as shown.
Note: Your computer must have an adapter installed that supports the DVI monitor.