Lenovo 8800, 8813, 8796, 8808, 8804, 8792, 8010 manual Connecting a serial ATA drive

Page 45

Note: If you are installing a 3.5-inch hard disk drive you must use a Universal Adapter Bracket, 5.25 to 3.5-inch. You can obtain this bracket from a local computer retailer or by contacting the Customer Support Center.

7.Reinstall the front bezel.

8.Slide the optical drive lock to the unlock position. See “Locating components” on page 21.

9.If you are installing a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch.

10.Install the drive into the drive bay until it snaps into position.

11.Slide the optical drive lock 1 to the locked position.

12.Pivot the drive bay assembly upward to gain access to the cable connections.

13.Connect at “Connecting a serial ATA drive.”

Connecting a serial ATA drive

A serial optical or additional hard disk drive can be connected to any available SATA connector.

1.Locate the signal cable that comes with the new drive.

2.Locate the available SATA connector on the system board. See “Identifying parts on the system board” on page 23.

3.Connect one end of the signal cable to the drive and the other to the available SATA connector on the system board.

Chapter 3. Installing options 29

Image 45

Contents User Guide Types 8010, 8792, 8796 Types 8804, 8808 Page User Guide Types 8010, 8792, 8796 Types 8804, 8808 Page Contents Index Appendix A. Manual modem Commands Conditions that require immediate action Important safety informationService General safety guidelinesPower cords and power adapters Extension cords and related devices Plugs and outletsBatteries Heat and product ventilation CD and DVD drive safetyLithium battery notice Additional safety informationLaser compliance statement Modem safety informationPower supply statement Introduction Xiv User Guide Arranging your workspace ComfortGlare and lighting Electrical outlets and cable lengths Air circulationConnecting your computer Setting up your computerUser Guide Setting up your computer 1394 Turning on power Finishing the software installation Completing important tasksUpdating your operating system Installing other operating systems Updating your antivirus softwareShutting down the computer User Guide Features Installing optionsMemory Expansion Available options Environment SpecificationsSupported operating positions Tools requiredHandling static-sensitive devices Installing external options Locating connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Locating components Accessing system board components and drives Identifying parts on the system board Installing memory What to do next Installing PCI adapters Installing internal drives Drive specifications Installing a drive in bay Connecting a serial ATA drive Installing a diskette drive in bay Installing options Security features Changing the battery Integrated cable lock Password protectionErasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Creating and using product recovery discs Recovering softwareTo use Product Recovery discs, do the following Backup and recoveryUsing the Rescue and Recovery workspace Creating and using rescue media Solving recovery problemsTo create rescue media, do the following Creating and using a Recovery Repair disketteSetting a rescue device in the startup sequence Recovering or installing device driversRecovering software User Guide Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsAdministrator Password User PasswordSetting, changing, and deleting a password Selecting a startup deviceAdvanced settings Exiting from the Setup Utility programChanging the startup device sequence User Guide Using system programs Updating flashing Bios from a diskette or CD-ROMUpdating system programs Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemUpdating system programs User Guide Basic troubleshooting Troubleshooting and diagnosticsDiagnostic programs PC-Doctor for DOS PC-Doctor for WindowsRunning diagnostics from the CD or diskettes Cleaning the mouseNon-optical mouse Optical mouseUser Guide Information resources Getting information, help, and serviceOnline Books folder ThinkVantage Productivity CenterAccess Help Warranty and safetyHelp and service Calling for service Using the documentation and diagnostic programsPurchasing additional services Using other servicesBasic AT commands Appendix A. Manual modem commandsLow speaker volume Enable RTS/CTS hardware flow control Extended AT commands+MS=? MNP/V.42/V.42bis/V.44 commandsFax Class 2 commands Fax Class 1 commandsVoice commands Appendix A. Manual modem commands User Guide Appendix B. Notices Trademarks Television output noticeIndex Page Page Part Number

Related manuals

Manual 48 pages 20.29 Kb