JBL SCS160 manual Troubleshooting, Review proper operation of your receiver/amplifier

Page 10

TROUBLESHOOTING

If there is no sound from any of the speakers:

•Check that receiver/ampli- fier is on and a source is playing.

•Check that the powered subwoofer is plugged in, and its Power switch ¡ is switched on (“•” position).

•Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other.

•Review proper operation of your receiver/amplifier.

If there is no sound coming from one speaker:

•Check the “Balance” control on your receiver/amplifier.

•Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other.

•In Dolby Digital or DTS modes, make sure that the receiver/processor is config- ured so that the speaker in question is enabled.

•Turn off all electronics

and switch the speaker in question with one of the

other speakers that is work- ing correctly. Turn every- thing back on, and deter- mine whether the problem has followed the speaker, or has remained in the same channel. If the problem is in the same channel, the source of the problem

is most likely with your receiver or amplifier, and you should consult the owner’s manual for that product for further informa- tion. If the problem has fol- lowed the speaker, consult your dealer for further assis- tance or, if that is not possi- ble, visit www.jbl.com for further information.

If there is no sound from the center speaker:

•Check all wires and con- nections between receiver/ amplifier and speaker. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured, or touch- ing each other.

•If your receiver/processor is set in Dolby Pro Logic mode, make sure the center speaker is not in phantom mode.

•If your receiver/processor is set in Dolby Digital or DTS modes, make sure the receiver/ processor is configured so that the center speaker is enabled.

If the system plays at low volumes but shuts off as volume is increased:

•Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other.

•If more than one pair of main speakers is being used, check the minimum imped- ance requirements of your receiver/amplifier.

If there is low (or no) bass output:

•Make sure the connections to the left and right “Speaker Inputs” have the correct polarity (+ and –).

•Make sure the subwoofer is plugged into an active electrical outlet, and is turned on (Power switch ¡ in the “•” position).

•In Dolby Digital or DTS modes, make sure your receiver/processor is config- ured so that the subwoofer and LFE output are enabled.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OWNER’S Guide Important Safety Precautions Read FirstIncluded Thank YOU for Choosing JBLJBL Consumer Products Front Center Channel Speakers Subwoofer Surround Speakers Speaker PlacementSlightly to angle the speaker down WALL-MOUNTING Mounting OptionsSatellites and Surrounds Attach plate to wall Slide speakerSpeaker Connections Connection TipsOUT DOLBY* PRO LOGIC* NON-DIGITAL Speaker LevelDolby PRO Logic NON-DIGITAL Line Level CenterVolume When the Auto/On switchOperation Review proper operation of your receiver/amplifier TroubleshootingTurn off all electronics If there is no sound from the surround speakers PRO Sound SpecificationsComes Home

SCS160 specifications

The JBL SCS160 is a high-performance home theater speaker system designed to deliver immersive audio experiences. Combining sophisticated engineering with cutting-edge technology, this speaker set channels JBL's 70-year legacy in sound innovation to elevate home entertainment systems.

One of the standout features of the JBL SCS160 is its compact design, making it ideal for various room sizes and configurations. The system includes dual satellite speakers, a subwoofer, and a center channel speaker, ensuring a true surround sound experience. Each satellite speaker is equipped with a 3-inch full-range driver and a 1-inch dome tweeter, providing clear mids and highs essential for a detailed audio experience. This setup allows for precise sound staging, letting users hear every whisper in a movie or catch the intricate details in a music track.

The subwoofer is notable for its powerful 8-inch driver, delivering deep, robust bass that can shake the room. This bass response enhances the overall listening experience, making action movies and music tracks come alive. With a built-in amplifier, the subwoofer offers both efficiency and performance without the need for an external power source.

The integration of advanced technologies enhances the SCS160's features even further. JBL’s proprietary Image Control Waveguide technology allows for optimized sound dispersion. This feature helps create a wider soundstage, ensuring that no matter where listeners are seated in the room, they enjoy a balanced and immersive sound experience.

The JBL SCS160 is also designed with user convenience in mind. It includes easy-to-use connections, allowing for seamless integration with most home entertainment systems. The compact, bookshelf-style design of the satellite speakers fits snugly into various environments, while the sleek finish ensures they complement modern home aesthetics.

Overall, the JBL SCS160 offers a perfect blend of performance, design, and technology. Whether for watching movies, gaming, or enjoying music, this speaker system makes every sound count, providing an enriching audio journey. With JBL's commitment to sound excellence, the SCS160 is an unbeatable choice for audio enthusiasts looking to elevate their home theater experience.
Top Page Image Contents