Lenovo 8119, 8121, 8120, 8107, 8105, 8109 Appendix B. Cleaning the mouse, Cleaning an optical mouse

Page 45

Appendix B. Cleaning the mouse

This appendix provides instructions on how to clean your mouse. The procedure will be different depending on which type of mouse you have.

Cleaning an optical mouse

If you experience some problems with your optical mouse, check the following:

1.Turn the mouse over and look carefully at the lens area.

a.If there is a smudge on the lens, gently clean the area with a plain cotton-tipped swab.

b.If there is some debris in the lens, gently blow the debris away from the area.

2.Check the surface on which you are using the mouse. If you have a very intricate picture or pattern beneath the mouse it is difficult for the digital signal processor (DSP) to determine changes in the mouse position.

Cleaning a mouse with a ball

If the pointer on the screen does not move smoothly with the mouse, you might need to clean the mouse.

Note: The following illustration might be slightly different from your mouse.

1 Retainer ring 2 Ball

3 Plastic rollers 4 Ball cage

To clean a mouse with a ball:

1.Turn off your computer.

2.Turn the mouse over, with the top side down, and look carefully at the bottom. Twist the retainer ring1to the unlocked position to remove the ball.

© Lenovo 2006. Portions © IBM Corp. 2005.

29

Image 45
Contents Page Page Page Page Contents Iv User Guide Conditions that require immediate action Important safety informationService General safety guidelinesPower cords and power adapters Extension cords and related devices Plugs and outletsBatteries Heat and product ventilation CD and DVD drive safetyAdditional safety information Lithium battery noticeTo connect To disconnect Laser compliance statement Modem safety informationPower supply statement Information resources OverviewXiv User Guide Features Installing optionsVideo subsystem Operating systems, preinstalled varies by model type Specifications Available options Supported operating positionsHandling static-sensitive devices Locating the connectors on the front of your computer Installing external optionsLocating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Identifying parts on the system board Locating componentsInstalling memory Installing options What to do next Installing a PCI adapterWhat to do next Security features Installing an optical driveChanging the battery Integrated cable lock Password protectionUser Guide Erasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables Starting the Setup Utility program Using the Setup Utility programViewing and changing settings Exiting from the Setup Utility programUser Password Password considerationsAdministrator Password IDE Drive User PasswordIDE Drive Master Password Setting, changing, and deleting a passwordResetting the hard disk drive and power-on password Using IDE Drives Setup Using Security Profile by DeviceSelecting a startup device Parallel ATAChanging the startup sequence Selecting a temporary startup deviceUser Guide Updating flashing Bios from a diskette or CD-ROM Appendix A. Updating system programsSystem programs Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemAppendix B. Cleaning the mouse Cleaning an optical mouseCleaning a mouse with a ball User Guide Basic AT commands Appendix C. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix C. Manual modem commands User Guide Appendix D. Customer replaceable unit CRU parts list Tier 1 CRUsTier 2 CRUs User Guide Appendix E. Notices Trademarks Television output noticeIndex BiosPage Page Part Number 39J8083