Lenovo 8120, 8121, 8119, 8107, 8105, 8109, 8108, 8104, 8118, 8117, 8106 manual User Guide

Page 46

3.Place your hand over the retainer ring and ball2, and then turn the mouse over, top side up, so that the retainer ring and ball fall out into your hand.

4.Wash the ball in warm, soapy water then dry it with a clean cloth. Blow air carefully into the ball cage4to dislodge dust and lint.

5.Look for a build up of dirt on the plastic rollers3inside the ball cage. This build up usually appears as a stripe running across the middle of the rollers.

6.If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl (rubbing) alcohol. Turn the rollers with your finger and continue swabbing them until all the dirt is removed. Be sure the rollers are still centered in their channels after you clean them.

7.Remove any fibers from the swab that might be remaining on the rollers.

8.Replace the ball and the retainer ring.

9.Turn your computer back on.

30User Guide

Image 46

Contents Page Page Page Page Contents Iv User Guide Important safety information Conditions that require immediate actionGeneral safety guidelines ServicePower cords and power adapters Plugs and outlets Extension cords and related devicesBatteries CD and DVD drive safety Heat and product ventilationLithium battery notice Additional safety informationTo connect To disconnect Modem safety information Laser compliance statementPower supply statement Overview Information resourcesXiv User Guide Installing options FeaturesVideo subsystem Operating systems, preinstalled varies by model type Specifications Supported operating positions Available optionsHandling static-sensitive devices Installing external options Locating the connectors on the front of your computerLocating the connectors on the rear of your computer Connector Description Obtaining device driversOpening the cover Locating components Identifying parts on the system boardInstalling memory Installing options Installing a PCI adapter What to do nextWhat to do next Installing an optical drive Security featuresIntegrated cable lock Password protection Changing the batteryUser Guide Erasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables Viewing and changing settings Using the Setup Utility programStarting the Setup Utility program Exiting from the Setup Utility programAdministrator Password Password considerationsUser Password IDE Drive User PasswordSetting, changing, and deleting a password IDE Drive Master PasswordResetting the hard disk drive and power-on password Selecting a startup device Using Security Profile by DeviceUsing IDE Drives Setup Parallel ATASelecting a temporary startup device Changing the startup sequenceUser Guide Appendix A. Updating system programs Updating flashing Bios from a diskette or CD-ROM System programs Updating flashing Bios from your operating system Recovering from a POST/BIOS update failureCleaning an optical mouse Appendix B. Cleaning the mouseCleaning a mouse with a ball User Guide Appendix C. Manual modem commands Basic AT commandsSet Tone Dial as default Low speaker volumeSet Pulse dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 1 commands Fax Class 2 commandsVoice commands Appendix C. Manual modem commands User Guide Tier 1 CRUs Appendix D. Customer replaceable unit CRU parts listTier 2 CRUs User Guide Appendix E. Notices Television output notice TrademarksBios IndexPage Page Part Number 39J8083