8.Loosen the black cover 3that protect the gold contacts on the new microprocessor 2, but do not remove the black cover. Use the vacuum pen 1 to pick up the microprocessor, and then completely remove the black cover.
9.Position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket.
Important
To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket.
10.Use the vacuum pen 1 to lower the microprocessor straight down into the microprocessor socket.
11.Lower the microprocessor retainer and lower the lever to secure the retainer.