Lenovo 4162, 5063, 5065, 5059, 5053, 5044 Replacing the heat sink and fan assembly, What to do next

Page 32

7.Install the new power supply assembly into the chassis so that the screw holes in the new power supply assembly are aligned with the corresponding holes in the rear of the chassis.

8.Install the four screws to secure the new power supply assembly in place. Note: Use only screws provided by Lenovo.

9.Connect the new power supply assembly cables to all drives and the system board. See “Locating parts on the system board” on page 9.

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To complete the replacement, go to “Completing the parts replacement” on page 37.

Replacing the heat sink and fan assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:

http://www.lenovo.com/support

This section provides instructions on how to replace the heat sink and fan assembly.

CAUTION:

The heat sink and fan assembly might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before removing the computer cover.

To replace the heat sink and fan assembly, do the following:

1.Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2.Remove the computer cover. See “Removing the computer cover” on page 14.

3.Lay the computer on its side for easier access to the system board.

4.Locate the heat sink and fan assembly. See “Locating components” on page 9.

5.Disconnect any cables that might prevent your access to the heat sink and fan assembly.

6.Disconnect the heat sink and fan assembly cable from the microprocessor fan connector on the system board. See “Locating parts on the system board” on page 9.

7.Pivot the handle 1 to release the heat sink and fan assembly clamp and then disengage the clamp from the plastic retention bracket.

24ThinkCentre User Guide

Page 31 Page 33
Image 32
Page 31 Page 33
Contents ThinkCentre User Guide Page ThinkCentre User Guide Second Edition November Copyright Lenovo Contents Appendix A. Notices Important safety information Vi ThinkCentre User Guide Features Product overviewSystem management features Input/Output I/O featuresPower supply ConnectivityPreinstalled software programs SpecificationsSecurity features Software overview Software provided with your Windows operating systemProduct Recovery ThinkVantage Rescue and RecoveryThinkVantage Client Security Solution Password ManagerPower Manager ThinkVantage System UpdateLocations Fingerprint SoftwareLocating connectors and parts on the rear of your computer Front connector, control, and indicator locationsConnector Description Locating components Locating parts on the system boardLocating internal drives System board part locationsDrive bay locations ThinkCentre User Guide Installing or replacing hardware Installing or replacing hardwareInstalling external options Handling static-sensitive devicesRemoving the computer cover Removing the computer coverRemoving and reinstalling the front bezel Removing the front bezelInstalling or replacing a PCI card Reinstalling the front bezelRemoving the screw that secures the PCI card latch Removing the PCI card Installing or replacing a memory module What to do nextReplacing the battery Opening the retaining clips of the memory slotInstall the new battery Replacing the power supply assembly Removing the power supply assembly screws Replacing the heat sink and fan assembly Removing the heat sink and fan assembly Replacing the microprocessor Accessing the microprocessor Replacing the optical drive Removing the microprocessorRemoving the optical drive Connecting a Sata optical drive Replacing the hard disk driveRemoving the hard disk drive Replacing the front audio and USB assembly Connecting a Sata hard disk driveReplacing the rear fan assembly Removing the front audio and USB assemblyRemoving the rear fan assembly Replacing the rear fan assembly Replacing the keyboardKeyboard connectors Replacing the mouseCompleting the parts replacement Reinstalling the computer coverObtaining device drivers Basic security features Integrated cable lockPadlock Password protectionErasing a lost or forgotten password clearing Cmos ThinkCentre User Guide Creating recovery media Recovery informationCreating and using recovery media Using recovery media Performing backup and recovery operationsPerforming a backup operation Performing a recovery operationUsing the Rescue and Recovery workspace Click the Restore your system from a backup iconCreating and using a rescue medium Using a rescue medium Creating a rescue mediumInstalling or reinstalling device drivers Solving recovery problemsUsing the Setup Utility program Starting the Setup Utility programViewing or changing settings Using passwordsPassword considerations Power-on passwordAdministrator password Setting, changing, or deleting a passwordViewing or changing the startup device sequence Selecting a startup deviceSelecting a temporary startup device Exiting the Setup Utility program Updating system programs Using system programsUpdating flashing the Bios from a disc Click Downloads and drivers Updating flashing the Bios from your operating systemRecovering from a Post and Bios update failure Updating system programs ThinkCentre User Guide Troubleshooting and diagnostic programs Basic troubleshootingPC-Doctor for DOS Diagnostic programsLenovo ThinkVantage Toolbox Non-optical mouse Cleaning the mouseOptical mouse Retainer ring Ball Plastic rollers Ball cage Getting information, help, and service Information resourcesOnline Books folder Lenovo ThinkVantage ToolsAccess Help Safety and warrantyThinkVantage Productivity Center Lenovo WelcomeCalling for service Help and serviceUsing the documentation and diagnostic programs Using other services Purchasing additional servicesAppendix A. Notices Television output notice European conformance CE mark TrademarksIndex CRUConsiderations Set Power-On Password ThinkCentre User Guide Page 0A22689

4162, 5057, 5055, 5051, 5041 specifications

Lenovo has a range of laptops and desktops designed to cater to a variety of user needs and preferences. Among these, the models 5041, 5044, 5063, 5059, and 5057 stand out due to their unique features, cutting-edge technologies, and overall performance characteristics.

The Lenovo 5041 is a budget-friendly option that boasts an impressive combination of power and portability. It is equipped with an AMD processor, delivering adequate processing capabilities for everyday tasks such as web browsing, office applications, and multimedia playback. With a sleek design, it provides a comfortable user experience and features a long-lasting battery, ensuring users remain productive throughout the day.

Next, the Lenovo 5044 builds on this foundation by offering enhanced graphics performance. It is fitted with an integrated AMD Radeon graphics card, making it an ideal choice for casual gaming and light graphic design work. Additionally, it comes with a larger display option, providing clearer visuals and better viewing angles. The ergonomic keyboard design adds to the overall usability, making it suitable for users who spend long hours typing.

The Lenovo 5063 further elevates the series with its focus on robust performance. Featuring Intel Core i5 or i7 processors, this model supports more demanding tasks, including multitasking and resource-heavy applications. The laptop integrates advanced thermal management technology, ensuring that it remains cool during intensive workloads, while also extending the device's longevity. The inclusion of a high-definition display enhances multimedia experiences, with vibrant colors and crisp details.

The Lenovo 5059 takes a step further in terms of connectivity. It includes multiple USB-C ports and HDMI outputs, making it versatile for users who require compatibility with various peripherals. This model is also geared towards business professionals, offering enhanced security features including a fingerprint reader and TPM (Trusted Platform Module) technology, ensuring data protection for sensitive information.

Lastly, the Lenovo 5057 is a premium offering that emphasizes both style and substance. Its aluminum chassis not only adds a touch of elegance but also improves durability. The device features fast SSD storage, providing quicker boot times and application launches. With Lenovo's innovative noise-canceling technology, users can enjoy clear audio during video conferences or while consuming media.

In summary, the Lenovo 5041, 5044, 5063, 5059, and 5057 each present unique features catering to different user needs, from basic productivity to premium performance. The advancements in technology ensure that users have access to reliable and efficient devices, making Lenovo a leading choice in the laptop market.
Top Page Image Contents