4.Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on where you want to connect the new keyboard or mouse, see “Locating controls and connectors on the front of your computer” on page 6 or “Locating connectors on the rear of your computer” on page 7.
Figure 33. Connecting the USB keyboard or mouse
What to do next:
•To work with another piece of hardware, go to the appropriate section.
•To complete the installation or replacement, go to “Completing the parts replacement” on page 37.
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover and reconnect cables.
To reinstall the computer cover and reconnect cables, do the following:
1.Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 8 for the locations of various components in your computer.
2.Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
3.Reinstall the front bezel if you have removed it. See “Removing and reinstalling the front bezel” on page 14.
4.Reinstall the PCI card holder if you have removed it. See “Removing and reinstalling the PCI card holder” on page 15.
Chapter 2. Installing or replacing hardware 37