Basic Functions
Switching the system on
In standby mode
●Press STANDBY ON to switch on the last selected source.
●Press PC LINK, INTERNET, CD, TUNER, or AUX to select the desired source.
In Eco Power Standby mode
●Press STANDBY ON on the system.
●Press PC LINK, CD, TUNER, INTERNET or AUX on the remote control.
Switching the system to standby mode
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in standby mode.
Switching the system to Eco Power standby mode (<0.5W)
●Press and hold STANDBY ON (or B on the remote control) for more than three seconds.
➜"ECO POWER MODE" is displayed, then the display screen will go blank.
➜The low power LED will be lighted.
Power saving automatic standby
As a
Dim mode
You can select the desired brightness for the display.
●Press DIM on the remote control repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
➜ DIM and the corresponding dim level will appear on the display, except for DIM OFF mode.
DIM | LEDs |
mode |
|
1 | on |
|
|
2 | on |
|
|
3 | off |
|
|
OFF | on |
|
|
Volume control
Adjust SOUND JOG (or press VOLUME +/- on the remote control) to increase or decrease the volume level.
➜
To listen through the headphones
●Connect the headphones plug to the n socket at the front of the system.
➜ The speakers will be muted.
To switch off the volume temporarily
●Press MUTE on the remote control.
➜ Playback will continue without sound and "MUTE ON" is displayed.
●To restore the volume, press MUTE again or increase the volume level.
E n g l i s h
19