Philips MC-i250 warranty Radio Reception

E n g l i s h

Troubleshooting

RADIO RECEPTION

	Radio reception is poor.	–	If the signal is too weak, adjust the antenna or
			connect an external antenna for better
			reception.
		– Increase the distance between the Micro System
			and your TV or VCR.
GENERAL
	The system does not react when buttons	–	Remove the AC power plug for one minute.
	are pressed.		Then reconnect and switch on the system again.
	Sound cannot be heard or is of poor	–	Adjust the volume.
	quality.	–	Disconnect the headphones.
		– Check that the speakers are connected correctly.
		– Check if the stripped speaker wire is clamped
			into the speaker terminal.
		– Make sure the MP3-CD was recorded within
			32-256 kbps bit rate with sampling frequencies
			at 16 kHz, 22.05 kHz, 48 kHz, 44.1 kHz or
			32 kHz.
	The left and right sound outputs are	–	Check the speaker connections and location.
	reversed.
	The remote control does not function	–	Select the source (CD or TUNER, for example)
	properly.		before pressing the function button (É,í,ë).
		– Reduce the distance between the remote
			control and the system.
		– Insert the batteries with their polarities
			(+/- signs) aligned as indicated.
		–	Replace the batteries.
		– Point the remote control directly toward the
			IR sensor on the front of the system.
	The timer is not working.	–	Set the clock correctly.
		– Press TIMER ON/OFF to switch on the timer.
	Not all buttons are lit.	–	Press DIM to select DIM OFF display mode.
	The Clock/Timer setting is erased.	–	Power has been interrupted or the power cord
			has been disconnected. Reset the clock/timer.

Visit our website “http://My.Philips.com” for online help.

38