V460 User Guide V1.0_en.book Page 33 Wednesday, March 24, 2010 4:59 PM
Appendix A. CRU instructions
6Pull the tab in the direction shown by arrow a.
a
7Take out the hard disk drive secured in a metal frame b. b
8Remove the screws and detach the metal frame from the hard disk drive.
9Attach the metal frame to a new hard disk drive and tighten the screws.
0Put the hard disk drive gently into the hard disk drive bay with the tab facing upwards and the connectors facing each other; then push it firmly into space.
A Reinstall the frame fixing screw.
B After aligning the attachment clips with their matching gaps, reinstall the compartment cover.
C Tighten the screws.
D Reinstall the battery pack.
E Turn the computer over again. Connect the AC adapter and the cables to the computer again.
33