Lenovo G560E, G460E manual General safety

Page 6

Lenovo G460e/G560e Hardware Maintenance Manual

General safety

Follow these rules below to ensure general safety:

Observe a good housekeeping in the area where the machines are put during and after the maintenance.

When lifting any heavy object:

1.Make sure that you can stand safely without slipping.

2.Distribute the weight of the object equally between your feet.

3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift it.

4.Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position.

Place removed covers and other parts in a safe place, keeping them away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip it over.

Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

2

Image 6
Contents Lenovo G460e/G560e Page Contents About this manual Lenovo G460e/G560eSafety information General safety Electrical safety Lenovo G460e/G560e Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo G460e/G560e Hardware Maintenance Manual Safety information Lenovo G460e/G560e Hardware Maintenance Manual Safety information Lenovo G460e/G560e Hardware Maintenance Manual Safety information Laser compliance statement Safety information Before replacing parts Strategy for replacing FRUsStrategy for replacing a hard disk drive Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs Original partGeneral checkout Following are not covered under warranty What to do firstPower system checkout Checking the AC adapterChecking operational charging Checking the battery pack Related service information Restoring the factory contents by using OneKey RecoveryPasswords Power-on passwordSupervisor password Power management Screen blank modeSleep standby mode Hibernation mode Specifications Feature DescriptionWlan Status indicators G460eG560e Off Indicator MeaningBlinking white Flashing whiteFn key combinations Key combination DescriptionPlastic to plastic FRU replacement noticesScrew notices Logic card to plasticRemoving and replacing an FRU Battery pack Removal steps of battery packDummy card Removal steps of dummy cardsStep Screw quantity Color Torque Hard disk drive Removal steps of hard disk driveTake out the hard disk drive secured in a metal frame c Optical drive Removal steps of optical driveDimm Removal steps of DimmPCI Express Mini Card for wireless LAN/WAN G460e G560eG460e G560e When installing Keyboard G460e G560e Step Screw quantity Color TorqueLenovo G460e/G560e Hardware Maintenance Manual G460e G560e Fan assembly and Heat Sink assembly Removal steps of fan assembly and heat sink assemblyLoosen four screws c to lift the heat sink assembly Keyboard bezel Removal steps of keyboard bezelRemove the screw c Lenovo G460e/G560e Hardware Maintenance Manual G460e G560e Step Screw quantity Color Torque Step Screw quantity Color Torque System board Important notices for handling the system boardRemoval steps of system board G460e M2.5 × 4 mm, flat-head, nylok-coated Black ~ 2.5 kgfcm Lenovo G460e/G560e Hardware Maintenance Manual LCD unit Removal steps of LCD unitStep Screw quantity Color Torque Remove the LCD unit in the direction shown by arrows c 1130 CPU Removal steps of CPUBase cover, speakers and bluetooth card Removal steps of base cover and bluetooth cardLenovo G460e/G560e Hardware Maintenance Manual C d e LCD front bezel Removal steps of LCD front bezelG560e Remove six screws a LCD panel, LCD cable and hinges Removal steps of LCD panel, LCD cable and hingesLenovo G460e/G560e Lenovo G460e/G560e Hardware Maintenance Manual Lenovo G460e/G560e Integrated camera Removal steps of integrated cameraAntenna assembly and LCD cover Removal steps of antenna assembly and LCD coverLocations Front viewRight-side view Bottom and Left-side view Parts list Overall Parts list-Overall MOW M Pcie NB HMC TBD NIWE1 ODD BEZEL-SM LCD FRUs 15.6-in. HD TFT G560e Keyboard Lenovo G460e/G560e Hardware Maintenance Manual Lenovo G460e/G560e Parts list-Miscellaneous parts Miscellaneous partsParts list-3-pin AC adapters AC adaptersPower cords Parts list-3-pin power cordsLenovo G460e/G560e Lenovo G460e/G560e Hardware Maintenance Manual Page Trademarks