JBL AVR580 manual FRONT-PANEL Control

Page 6

FRONT-PANEL CONTROL

1Main Power Switch

2 System Power Control

3 Power Indicator

4 Headphone Jack

5 Tone Mode

6 Speaker Selector

7 Surround Mode Group Selector

8 Surround Mode Selector

9 Tuning Selector ) ‹ Button

! Tuner Band Selector

1Main Power Switch: Press this button to apply power to the AVR580. When the switch is pressed in, the unit is placed in a Standby mode, as indicated by the red Power Indicator 3 in the center of the System Power Control

2. This button MUST be pressed in to operate the unit. To turn the unit off and prevent the use of the remote control, this switch should be pressed until it pops out from the front panel so that the word “OFF” may be read at the top of the switch.

NOTE: This switch is normally left in the “ON” position.

2System Power Control: When the Main Power Switch 1 is “ON,” press this button to turn on the AVR580; press

it again to turn the unit off. Note that the Power Indicator 3 in the center of the switch will turn orange when the unit is on.

3Power Indicator: This LED will be lit in red when the unit is in the Standby mode to signal that the unit is ready to be turned on. When the unit is in operation, the indicator will turn orange.

@Set Button

# › Button

$ Preset Station Selector % Input Source Selector ^ Tuner Mode Selector & Optical 3 Digital Input * Coaxial 3 Digital Input ( Video 4 Video Input Jacks Ó Video 4 Audio Input Jacks Ô Bass Control

Balance Control

4Headphone Jack: This jack may be used to listen to the AVR580’s output through a pair of headphones. Be certain that the headphones have a standard 6.4mm (1/4") stereo phone plug. The main room speakers will automatically be turned off when the headphone jack is in use.

5Tone Mode: This button controls the tone control settings, enabling adjustment of the bass and treble boost/cut and bal- ance or the removal of the tone controls from the signal path. The first press of the button displays a TONE IN message in the Main Information Display ˜. If you wish to set the tone controls to “flat,” without any treble, bass or balance alter- ation, press the ‹ or › Selector Buttons )# so that TONE OUT appears in the Lower Display Line B.

6Speaker Selector: Press this button to begin the process of configuring the AVR580 for the type of speakers it is being used with. For information on configuring the speaker settings, see page 24.

ÒTreble Control

ÚChannel Adjust Selector Û Delay Adjust Selector Ù Digital Input Selector ı Volume Control

ˆ Input Indicators

˜ Main Information Display ¯ Remote Sensor Window ˘ Surround Mode Indicators

7Surround Mode Group Selector: Press this button to select the top-level group of surround modes. Each press of the button will select a major mode grouping in the following order:

Dolby Modes _ DTS Digital Modes _ VMAx Modes _ DSP Modes _ Stereo Modes _ Logic 7 Modes

Once the button is pressed so that the name of the desired surround mode group appears in the on-screen display and in the Lower Display Line B, press the Surround Mode Selector 8 to cycle through the individual modes available. For example, press this button to select Dolby modes, and then press the Surround Mode Selector 8 to choose from the various mode options.

8Surround Mode Selector: Press this button to select from among the available surround mode options for the major mode group selected. The specific modes will vary based on the number of speak- ers available, the major mode group and whether the input source is digital or ana- log. For example, press the Surround Mode Group Selector 7 to select a major mode grouping such as Dolby or

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AVR580 Declaration of Conformity AVR580 AUDIO/VIDEO ReceiverTypographical Conventions Read first! Important Safety Precautions DTS Neo6 Description and FeaturesIntroduction On-screen menu and display systemImportant Safety Information Safety InformationFRONT-PANEL Control Page FRONT-PANEL Information Display Upper Display LineREAR-PANEL Connections Terminals on the AVR580 to the black Optical Digital Audio Inputs Main Remote Control Functions Again to operate the AVR580’s func- tions with the remote Multiroom Press this button to Page Zone II Remote Control Functions ∆ Play Forward/Reverse/StopAudio Equipment Connections System InstallationInstallation and Connections Video Equipment ConnectionsVideo Connection Notes System and Power ConnectionsMain Room Remote Control Extension Jack to the Remote IR Input jack on compatible equipmentBetween the output of the amplifiers and the speakers AC Power Cord Jack ‚Multiroom Connections RS-232 ConnectionsSystem Configuration Speaker PlacementSystem Setup Speaker Selection and PlacementLine B Using the On-Screen DisplaySetting the System Configuration Memory On the screen, press the ⁄/¤ ButtonsInput Setup Surround SetupOn the DSP Surr menu, the choices made with the ‹/› Buttons Speaker Setup On the remote to move the cursor toOn the remote so that SUB LFE appears in the on-screen menu Delay Settings Seconds for the system to return to nor- mal operation Output Level AdjustmentUsing EzSet At the top of the remoteManual Output Level Adjustment Additional Input Adjustments Source Selection Volume ControlBasic Operation OperationSurround Mode Selection Digital Audio PlaybackSpeaker/Channel Input Indicators E Digital Bitstream IndicatorsSpeaker/Channel Indicators Selecting a Digital SourcePCM Audio Playback Night ModeSpeaker/ Channel Input Indicators 31 34 or the front-panel Digital InputsSurround Mode Chart Mode FeaturesTuner Operation Tape RecordingVideo 1/Video 2 Audio and Video Outputs fi‡36 39 in the Record ModeMemory Backup Selector Button 41 to activateSurround Amplifier Channel Assignment Advanced FeaturesTurn-On Volume Level Display Brightness AVR580’s Main InformationSemi-OSD Settings Full-OSD Time-Out AdjustmentMultiroom Operation Multiroom SetupInstallation Multiroom OperationPage Programming the Product Codes Programming the RemoteLearning Codes Macro ProgrammingErasing Learned Codes Press the AVR Selector f Erasing Macro CommandsProgrammed Device Functions Within 10 seconds, pressVolume Punch-Through Channel Control Punch- ThroughTransport Control Punch- Through Resetting the Remote Memory Reassigning Device Control SelectorsFunction List Direct Preset UpPreset Down ClearSetup Code Table TV Manufacturer/Brand050 102 106 131 140 145 161 193 195 375120 200 286 122 209 262049 050 063 104 107 113 143 104 136 139 153 159 162 171 198 262050 090 107 139 143 162 262 034 074 182 186 259046 050 068 075 090 120 235 265 272 291 235 308 330046 047 062 065 104 120 139 150 168 265 273 279 327 McMICHAEL268 271 272 279 292 297 304 305 318 328 329 361 379 049 050 053 063 104 107 139 143 244 245 246 250 287 312 317016 044 054 065 090 093 094 104 142 163 168 189 279 309 324 075 104 113 148 279271 283 297 306 368112 157 158 192 268 271 050 056045 047 050 065 104 133 139 279 046 147 235 294080 090 113 147 148 236 242 262 020 076 155 202 235 244 245 246 308 312 330Setup Code Table VCR 149 155 090 128 148 155039 054 148 155 032 039 060 062 073 127 148 155019 042 044 084 090 103 133 139 054 093 160084 155 160 019 042 044 045 084 090 103 106 133 139 149 150 155 160132 133 141 142 159 161 044 047 090019 042 044 045 084 090 103 106 133 139 031 032 033 059 073 078 127 148 155042 054 056 057 060 062 066 067 092 096 150 155 169 172 032 073 078 087 090 114 127 136 148019 053 134 162 008 015 019 040 073 106 149 151 160044 045 053 080 090 153 155 170 020 044 045 047 090 126 128 133 141085 090 110 135 044 096Setup Code Table CD 038 045 046 171 175 202 203 074 197 198200 201 229 036 056 057 064 065 089 090 091 092 096 099 104 212Setup Code Table Tape Setup Code Table DVDSetup Code Number Setup Code Table SAT 388 395 399 420 423 425 429 430 431 407 489462 463 464 465 406 411 416345 348 352 353 363 364 367 491306 328 347 384 402 403 385 401 427Setup Code Table CBL Processor Reset Troubleshooting GuidePress Mute Button AVR580 Specifications Page

AVR580 specifications

The JBL AVR580 is a versatile home theater receiver renowned for its blend of performance, technological innovation, and user-friendly features. Designed for cinephiles and music enthusiasts, it serves as the heart of a home audio-visual system, capable of transforming an ordinary room into a cinematic experience.

One of the standout features of the AVR580 is its impressive power output. With a robust amplification that delivers up to 100 watts per channel, it can easily drive large speakers and create an immersive sound stage. This considerable power is matched by an array of connection options, including multiple HDMI inputs, component inputs, and legacy connections like RCA, allowing users to connect a variety of devices, from gaming consoles to Blu-ray players.

The AVR580 supports several surround sound formats, including Dolby Digital and DTS, providing realistic audio experiences that bring movies and music to life. Additionally, it features JBL's proprietary technologies, such as the Auto Calibration system, which intelligently adjusts speaker settings based on room acoustics, ensuring optimal sound quality regardless of where speakers are placed.

Another key characteristic is its user-friendly interface. The AVR580 includes an on-screen display that simplifies navigation through its extensive features, making it easy for users to customize settings and switch between sources. The remote control is equally intuitive, providing quick access to essential functions.

Connectivity is further enhanced with features like wireless streaming capabilities, allowing users to enjoy music from popular platforms such as Spotify and Apple Music seamlessly. The receiver also supports multi-room audio, enabling you to distribute sound across different areas of your home.

In terms of build quality, the JBL AVR580 boasts a sleek and modern design that fits well in any entertainment center. The high-quality components and robust construction ensure durability and long-term performance, making it a reliable choice for home theater enthusiasts.

Overall, the JBL AVR580 encapsulates what home theater aficionados seek—powerful performance, advanced technologies, user-friendly features, and stylish design. It is a cornerstone for any robust home entertainment system, offering an exceptional audio experience that truly enhances the way we enjoy movies, music, and games.
Top Page Image Contents