JBL AVR580 Selecting a Digital Source, Digital Bitstream Indicators, Speaker/Channel Indicators

Page 32
31 34

An optional, external RF demodulator is required to use the AVR580 to listen to the Dolby Digital soundtracks available on laser discs. Connect the RF output of the LD player to the demodulator and then connect the digital output of the demodulator to the Optical or Coaxial Inputs &* 31 34 of the AVR580. No demodulator is required for use with DVD players or DTS-encoded laser discs.

DTS

DTS is another digital audio system that is capable of delivering 5.1 or 6.1 discrete or matrix sound field reproduction. Although both DTS and Dolby Digital are digital, they use different methods of encoding the signals, and thus they require different decoding circuits to con- vert the digital signals back to analog.

DTS-encoded soundtracks are available on select DVD and LD discs, as well as on special audio-only DTS discs. You may use any LD or CD player equipped with a digital output to play DTS-encoded discs with the AVR580. All that is required is to connect the player’s output to either an Optical or Coaxial Input on the rear

panel or front panel &*.

In order to listen to DVDs encoded with DTS soundtracks, the DVD player must be compatible with the DTS signal as indi- cated by a DTS logo on the player’s front panel. Early DVD players may not be able to play DTS-encoded DVDs. This does not indicate a problem with the AVR580, as some players cannot pass the DTS signal through to the digital outputs. If you are in doubt as to the capability of your DVD player to handle DTS discs, consult the player’s owner’s manual.

NOTE: Some DVD players have a default setting that does not pass through the DTS signal. Before playing DVDs with a DTS soundtrack, make certain that the settings in your DVD player have been properly adjusted so that DTS audio is passed through. Consult the owner’s manual for your DVD player for more information on making these settings.

Selecting a Digital Source

To utilize either digital mode, you must have properly connected a digital source to the AVR580. Connect the digital out- puts from DVD players, HDTV receivers, satellite systems or CD players to the Optical or Coaxial Inputs &* 31 34 . In order to provide a backup signal and a

source for analog stereo recording, the analog outputs provided on digital source equipment should also be connected to their appropriate inputs on the AVR580 rear panel (e.g., connect the analog stereo audio output from a DVD to the DVD Audio Inputs k on the rear panel when you connect the source’s digital outputs).

If you have not already configured an input for a digital source using the on- screen menus as shown on page 22, first select the input using the remote or front- panel controls as outlined in this manual. Next, select the digital source by press- ing the Digital Select Button qP and then using the ⁄/¤ Buttons n on the remote or the ‹/› Selector Buttons )# on the front panel to choose any of the OPTICAL or COAXIAL inputs, as they appear in the Upper Display Line A or on-screen display. When the digital source is play- ing, the AVR580 will automatically detect which type of digital data stream is being decoded and display that information in the Upper Display Line A.

Digital Bitstream Indicators

When a digital source is playing, the AVR580 senses the type of bitstream data that is present. Using this information, the correct surround mode will automatically be selected. For example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bitstreams will enable Dolby Digital decoding. When the unit senses PCM data from CDs and LDs, it will allow the appropriate surround sources to be selected manually. Since the range of available surround modes is dependent on the type of digital data that is present, the AVR580 uses display indi- cators to let you know what type of signal is present. This will help you to under- stand the choice of modes.

To help you see which type of digital source is playing, the Surround Mode Indicators ˘ in combination with the Information Display ˜ also serve as bitstream indications to show which type of bitstream is present, as well as the surround mode in use, if applicable.

Digital: When the Dolby Digital or Dolby Digital EX logo is lit, a Dolby Digital bitstream is being received.

Depending on the settings on the source player and specific surround information and number of channels on the disc,

a number of surround modes are possi- ble. For discs with full 5.1 audio, only

the Dolby Digital and VMAx modes are available.

DTS: When the DTS logo lights, a DTS bitstream is being received. When the unit senses this type of data, only the applicable DTS mode may be used.

PCM: When the word DIGITAL lights, a standard Pulse Code Modulation, or PCM, signal is being received. This is the type of digital audio used by conventional compact disc and laser disc recordings. When a PCM bitstream is present, all modes except Dolby Digital and DTS are available.

MP3: When MP3 appears on the Lower Display Line B a compatible MPEG 1/Layer 3 digital signal is being received. This is the popular audio format used by many computer programs for recording compressed audio files. When an MP3 bitstream is present, the sound will automatically be played in the Stereo (Surround Off) mode. The surround modes are not available during MP3 playback. There are many different forms of MP3 encoding available and the format is used at a number of different bit rates. The AVR580 may not be compatible with all forms of MP3, particularly when the data file is encoded at 128kb/s or above.

Speaker/Channel Indicators

In addition to the bitstream indicators, the AVR580 features a set of unique channel-input indicators that tell you how many channels of digital information are being received and/or whether the digital signal is interrupted. (See Figure 9.)

Figure 9

These indicators are the L/C/R/LFE/SL/SR/SBL/SBR letters that are inside the center boxes of the

Speaker/Channel Input Indicators E

in the front-panel Main Information Display ˜. When a standard analog signal is in use, only the “L” and “R” indi- cators will light, as analog signals have only left and right channels.

Digital signals, however, may have two, five, six or seven channels, depending on

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents AVR580 Typographical Conventions Declaration of ConformityAVR580 AUDIO/VIDEO Receiver Read first! Important Safety Precautions Description and Features IntroductionDTS Neo6 On-screen menu and display systemImportant Safety Information Safety InformationFRONT-PANEL Control Page FRONT-PANEL Information Display Upper Display LineREAR-PANEL Connections Terminals on the AVR580 to the black Optical Digital Audio Inputs Main Remote Control Functions Again to operate the AVR580’s func- tions with the remote Multiroom Press this button to Page Zone II Remote Control Functions ∆ Play Forward/Reverse/StopSystem Installation Installation and ConnectionsAudio Equipment Connections Video Equipment ConnectionsSystem and Power Connections Main Room Remote Control ExtensionVideo Connection Notes Jack to the Remote IR Input jack on compatible equipmentAC Power Cord Jack ‚ Multiroom ConnectionsBetween the output of the amplifiers and the speakers RS-232 ConnectionsSpeaker Placement System SetupSystem Configuration Speaker Selection and PlacementUsing the On-Screen Display Setting the System Configuration MemoryLine B On the screen, press the ⁄/¤ ButtonsInput Setup Surround SetupOn the DSP Surr menu, the choices made with the ‹/› Buttons Speaker Setup On the remote to move the cursor toOn the remote so that SUB LFE appears in the on-screen menu Delay Settings Output Level Adjustment Using EzSetSeconds for the system to return to nor- mal operation At the top of the remoteManual Output Level Adjustment Additional Input Adjustments Volume Control Basic OperationSource Selection OperationSurround Mode Selection Digital Audio PlaybackDigital Bitstream Indicators Speaker/Channel IndicatorsSpeaker/Channel Input Indicators E Selecting a Digital SourceNight Mode Speaker/ Channel Input IndicatorsPCM Audio Playback 31 34 or the front-panel Digital InputsSurround Mode Chart Mode FeaturesTuner Operation Tape RecordingOutputs fi‡36 39 in the Record Mode Memory BackupVideo 1/Video 2 Audio and Video Selector Button 41 to activateAdvanced Features Turn-On Volume LevelSurround Amplifier Channel Assignment Display Brightness AVR580’s Main InformationSemi-OSD Settings Full-OSD Time-Out AdjustmentMultiroom Setup InstallationMultiroom Operation Multiroom OperationPage Programming the Product Codes Programming the RemoteErasing Learned Codes Learning CodesMacro Programming Erasing Macro Commands Programmed Device FunctionsPress the AVR Selector f Within 10 seconds, pressTransport Control Punch- Through Volume Punch-ThroughChannel Control Punch- Through Resetting the Remote Memory Reassigning Device Control SelectorsFunction List Preset Up Preset DownDirect ClearSetup Code Table TV Manufacturer/Brand140 145 161 193 195 375 120 200 286050 102 106 131 122 209 262104 136 139 153 159 162 171 198 262 050 090 107 139 143 162 262049 050 063 104 107 113 143 034 074 182 186 259235 308 330 046 047 062 065 104 120 139 150 168 265 273 279046 050 068 075 090 120 235 265 272 291 327 McMICHAEL049 050 053 063 104 107 139 143 244 245 246 250 287 312 317 016 044 054 065 090 093 094 104 142 163 168 189 279 309 324268 271 272 279 292 297 304 305 318 328 329 361 379 075 104 113 148 279306 368 112 157 158 192 268 271271 283 297 050 056046 147 235 294 080 090 113 147 148 236 242 262045 047 050 065 104 133 139 279 020 076 155 202 235 244 245 246 308 312 330Setup Code Table VCR 090 128 148 155 039 054 148 155149 155 032 039 060 062 073 127 148 155054 093 160 084 155 160019 042 044 084 090 103 133 139 019 042 044 045 084 090 103 106 133 139 149 150 155 160044 047 090 019 042 044 045 084 090 103 106 133 139132 133 141 142 159 161 031 032 033 059 073 078 127 148 155032 073 078 087 090 114 127 136 148 019 053 134 162042 054 056 057 060 062 066 067 092 096 150 155 169 172 008 015 019 040 073 106 149 151 160020 044 045 047 090 126 128 133 141 085 090 110 135044 045 053 080 090 153 155 170 044 096Setup Code Table CD 074 197 198 200 201 229038 045 046 171 175 202 203 036 056 057 064 065 089 090 091 092 096 099 104 212Setup Code Number Setup Code Table TapeSetup Code Table DVD Setup Code Table SAT 407 489 462 463 464 465388 395 399 420 423 425 429 430 431 406 411 416491 306 328 347 384 402 403345 348 352 353 363 364 367 385 401 427Setup Code Table CBL Press Mute Button Processor ResetTroubleshooting Guide AVR580 Specifications Page

AVR580 specifications

The JBL AVR580 is a versatile home theater receiver renowned for its blend of performance, technological innovation, and user-friendly features. Designed for cinephiles and music enthusiasts, it serves as the heart of a home audio-visual system, capable of transforming an ordinary room into a cinematic experience.

One of the standout features of the AVR580 is its impressive power output. With a robust amplification that delivers up to 100 watts per channel, it can easily drive large speakers and create an immersive sound stage. This considerable power is matched by an array of connection options, including multiple HDMI inputs, component inputs, and legacy connections like RCA, allowing users to connect a variety of devices, from gaming consoles to Blu-ray players.

The AVR580 supports several surround sound formats, including Dolby Digital and DTS, providing realistic audio experiences that bring movies and music to life. Additionally, it features JBL's proprietary technologies, such as the Auto Calibration system, which intelligently adjusts speaker settings based on room acoustics, ensuring optimal sound quality regardless of where speakers are placed.

Another key characteristic is its user-friendly interface. The AVR580 includes an on-screen display that simplifies navigation through its extensive features, making it easy for users to customize settings and switch between sources. The remote control is equally intuitive, providing quick access to essential functions.

Connectivity is further enhanced with features like wireless streaming capabilities, allowing users to enjoy music from popular platforms such as Spotify and Apple Music seamlessly. The receiver also supports multi-room audio, enabling you to distribute sound across different areas of your home.

In terms of build quality, the JBL AVR580 boasts a sleek and modern design that fits well in any entertainment center. The high-quality components and robust construction ensure durability and long-term performance, making it a reliable choice for home theater enthusiasts.

Overall, the JBL AVR580 encapsulates what home theater aficionados seek—powerful performance, advanced technologies, user-friendly features, and stylish design. It is a cornerstone for any robust home entertainment system, offering an exceptional audio experience that truly enhances the way we enjoy movies, music, and games.
Top Page Image Contents