Lenovo 3425, 5214, 5354, 3980 manual Hardware Maintenance Manual

Page 10

Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from an electric shock.

•Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly.

•Do not work alone under hazardous conditions or near equipment that has hazardous voltages.

•Disconnect all power before:

–Performing a mechanical inspection

–Working near power supplies

–Removing or installing Field Replaceable Units (FRU)

•Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine and to lock the wall box in the off position.

•If you need to work on a machine that has exposed electrical circuits, observe the following precautions:

–Ensure that another person, familiar with the power-off controls, is near you. Remember: Another person must be there to switch off the power, if necessary.

–Use only one hand when working with powered-on electrical equipment; keep the other hand in your pocket or behind your back. Remember: There must be a complete circuit to cause an electric shock. By observing the above rule, you may prevent a current from passing through your body.

–When using a tester, set the controls correctly and use the approved probe leads and accessories for that tester.

–Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames.

Observe the special safety precautions when you work with very high voltages; these instructions are in the safety sections of maintenance information. Use extreme care when measuring high voltages.

•Regularly inspect and maintain your electrical hand tools for safe operational condition.

•Do not use worn or broken tools and testers.

•Never assume that power has been disconnected from a circuit. First, check that it has been powered-off.

•Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds.

•Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.

•Do not service the following parts with the power on when they are removed from their normal operating places in a machine:

–Power supply units

–Pumps

–Blowers and fans

–Motor generators

and similar units. (This practice ensures correct grounding of the units.)

•If an electrical accident occurs:

–Use caution; do not become a victim yourself.

–Switch off power.

–Send another person to get medical aid.

4Hardware Maintenance Manual

Image 10
Contents Hardware Maintenance Manual Page Hardware Maintenance Manual Third Edition December Copyright Lenovo 2009 Contents Appendix A. Notices About this manual Important safety informationImportant information about replacing RoHS compliant FRUs Must be RoHS General safety Safety informationElectrical safety Hardware Maintenance Manual Voltage-selection switch Safety inspection guideHandling electrostatic discharge-sensitive devices Safety notices multi-lingual translationsGrounding requirements To Connect To Disconnect ≥18 kg 37 lbs ≥32 kg 70.5 lbs ≥55 kg 121.2 lbs Safety information Perigo Cuidado Para Conectar Para DesconectarPerigo Safety information Hardware Maintenance Manual Safety information Hardware Maintenance Manual Connexion Déconnexion Vorsicht Achtung Arbeitsschutzrichtlinien beim Anheben der Maschine beachten Safety information Pericolo Attenzione Per collegarsi Per scollegarsiPrestare attenzione nel sollevare lapparecchiatura Safety information Peligro No debe Adopte procedimientos seguros al levantar el equipo Lenovo ThinkVantage Tools General informationOnline Books folder ThinkVantage Productivity CenterLenovo Welcome Access HelpSpecifications Additional information resourcesEnvironment DimensionsWeight Electrical inputHardware Maintenance Manual Checking for power problems General checkoutProblem determination tips General checkout Hardware Maintenance Manual Lenovo ThinkVantage Toolbox DiagnosticsLenovo System Toolbox PC-Doctor for DOS Creating a diagnostic disc PC-Doctor for Rescue and RecoveryRunning the diagnostic program from a diagnostic disc Navigating through the diagnostics programs Running testsViewing the test log Quick and Full erase hard disk driveViewing and changing settings Using the Setup UtilityStarting the Setup Utility program Using passwordsSetting, changing, and deleting a password Set User PasswordChange Supervisor Password Enabling or disabling a deviceSelecting a temporary startup device Exiting from the Setup Utility programSelecting a startup device Selecting or changing the startup device sequenceHardware Maintenance Manual Hard disk drive boot error Symptom-to-FRU indexDiagnostic error codes Bios from a disc on 001-00X-XXX System error 001-01X-XXX System errorXXX 001-264-XXX System IRQ error XXX 001-255-XXX 001-256-XXX005-00X-XXX Video error XXX 001-287-XXX 001-288-XXX System TimerXXX 005-011-XXX 005-012-XXX 005-2XX-XXX 005-3XX-XXX Video subsystem error Xxxusb port test halt, error threshold exceeded Diagnostic error code FRU/Action 025-00X-XXX 025-01X-XXX IDE interface failure 025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface030-03X-XXX 030-04X-XXX Scsi interface error 030-00X-XXX 030-01X-XXX Scsi interface failureDiagnostic error code FRU/Action Run Setup Diagnostic error code FRU/Action Diagnostic error code FRU/Action Diagnostic error code FRU/Action XXX-XXX Mouse error Beep symptoms Post error codesPost error message Description/Action Miscellaneous error messagesMessage/Symptom FRU/Action Message/Symptom FRU/Action Undetermined problems Locating connectors on the rear of your computer Locations Locating connectors on the front of your computerReplacing FRUs Rear connector locations Locating componentsLocating parts on the system board Component locationsRemoving the computer cover System board part locationsRemoving and reinstalling the front bezel Removing the computer coverInstalling or replacing a memory module Removing the front bezelWhat to do next Replacing the battery Removing the batteryReplacing the hard disk drive Removing the hard disk driveInstalling the hard disk drive into the bracket Replacing the optical driveRemoving the optical drive Installing the optical drive Replacing the heat sinkReplacing the system fan assembly Removing the heat sinkRemoving the system fan assembly Installing the system fan assembly Replacing the microprocessorAccessing the microprocessor Removing the microprocessor Replacing the system board Replacing the ac power adapter Tabs on the microprocessor socket cover bottom viewCompleting the parts replacement Connecting the ac power adapterRouting the cables Hardware Maintenance Manual Machine Type FRU listsFRUs FRUs listed in the following tables are not illustrated A9J B1J Windows XP Pro Recovery CDs Power Cords PrimaryA9J B1J Power Cords Secondary Vista Home Basic 32 Recovery DVDsWindows 7 Professional 64 Recovery DVDs 41A5310 Optical wheel mouse 400DPI, USB models Line Cord Japanese and Japanese English modelsQcje M-0 stepping 45W models Japanese models A1J A2J A3J A4J A5J A6J B1J B2J B3J B4J B3J B4J Windows XP Pro Recovery CDs B3J B4J Power Cords SecondaryJapanese models B1J B2J B3J B4J Optical drive, DVD-ROM Drive 16x/48x Sata models A1J A3J A5J Power cable for ODD & HDD, 595 all models Mice Additional service information Automatic configuration and power interface Acpi Bios Recovering from a POST/BIOS update failurePower management Automatic Power-On featuresAppendix A. Notices Television output notice TrademarksPage 71Y6308

5354, 3980, 5214, 3425 specifications

The Lenovo 3425, 5214, 3980, and 5354 are part of Lenovo's diverse lineup of laptops, each designed with unique features and technologies catered to various user needs.

Starting with the Lenovo 3425, this model stands out for its portability and performance. It typically offers a lightweight design with a robust build quality, ideal for on-the-go professionals or students. The laptop is powered by AMD processors, ensuring good processing power for multitasking and productivity tasks. With a comfortable keyboard and intuitive layout, users can enjoy a smooth typing experience. The screen is often equipped with an HD display, providing clear visuals for work or entertainment. Lenovo’s TruVivid technology enhances color accuracy, making it suitable for graphic design and photo editing.

The Lenovo 5214 emphasizes versatility and connectivity. It usually features an array of ports, including USB-C, HDMI, and Ethernet, allowing users to connect various peripherals easily. This model is often tailored for business professionals, with enhanced security features such as a fingerprint reader and TPM (Trusted Platform Module) for encrypted data storage. The display is often anti-glare, making it convenient for use in different lighting conditions. Additionally, the battery life is commendable, ensuring users can work for extended periods without frequent recharges.

The Lenovo 3980 is geared towards gamers and creative professionals. This model typically includes higher-end graphics options such as NVIDIA or AMD GPUs, enabling smooth gameplay and graphic-intensive applications. A high-refresh-rate display enhances gaming experiences, allowing for fluid motion and reduced blur. The design often incorporates advanced thermal management to keep the laptop cool during long gaming sessions, while customizable RGB keyboard backlighting offers a personalized touch.

Lastly, the Lenovo 5354 is designed for multimedia enthusiasts, featuring enhanced audio technologies and high-resolution displays. This model often integrates Dolby Audio for immersive sound quality, elevating the multimedia consumption experience. Its larger screen size and higher pixel density make it ideal for watching movies or editing videos. Additionally, the laptop's optimized battery efficiency ensures that users can enjoy their favorite media without frequent interruptions from charging.

Each of these Lenovo models embodies a commitment to quality and performance, tailored to meet the diverse demands of modern users, from business professionals to gamers and creative artists.