Lenovo 4229, 4223, 4228 manual Voltage-selection switch, Safety inspection guide

Page 11

Voltage-selection switch

Some computers are equipped with a voltage-selection switch located near the power-cord connection point on the computer and some computers do not have a voltage-selection switch. Before you install your computer or relocate your computer to another country or region, you must be certain that you have matched your computer to the voltage available at your electrical outlet.

CAUTION:

You must know the voltage of the electrical connection (outlet) where your computer will be connected. If you do not know the voltage, contact your local electric company or refer to official Web sites or other literature for travelers to the country or region where you are located.

If your computer has a voltage-selection switch, you must set the switch to match the voltage available at your electrical outlet. Setting the voltage-selection switch incorrectly will cause the computer to malfunction and might cause permanent damage to the computer. Do not connect the computer to an electrical outlet until you have verified that the voltage-selection switch setting matches the voltage available at the electrical outlets.

If your computer does not have a voltage-selection switch, inspect the voltage-rating label on the bottom of the computer and note the following:

If the voltage-rating label shows a range of either “100-127 V” or “200-240 V,” you must ensure that the voltage provided at the electrical outlet matches the voltage rating on the computer label. If it does not match, do not attempt to connect the computer to the electrical outlet, unless an external device such as a voltage-converting transformer is used.

If the voltage-rating label shows a dual range of “100-127 V” and “200-240 V,” this signifies that the computer is suitable for worldwide operation and the computer will automatically adjust to the voltage at the electrical outlet regardless of the country or region where the computer is being connected.

Safety inspection guide

The intent of this inspection guide is to assist you in identifying potentially unsafe conditions on these products. Each machine, as it was designed and built, had required safety items installed to protect users and service personnel from injury. This guide addresses only those items. However, good judgment should be used to identify potential safety hazards due to attachment of features or options not covered by this inspection guide.

If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem.

Consider these conditions and the safety hazards they present:

Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock).

Explosive hazards, such as a damaged CRT face or bulging capacitor

Mechanical hazards, such as loose or missing hardware

The guide consists of a series of steps presented in a checklist. Begin the checks with the power off, and the power cord disconnected.

Checklist:

1.Check exterior covers for damage (loose, broken, or sharp edges).

2.Power-off the computer. Disconnect the power cord.

Chapter 2. Safety information 5

Image 11
Contents ThinkStation Hardware Maintenance Manual Page ThinkStation Hardware Maintenance Manual First Edition April Copyright Lenovo Contents Appendix A. Notices 109 About this manual Important Safety InformationThinkStation Hardware Maintenance Manual Electrical safety Safety informationGeneral safety ThinkStation Hardware Maintenance Manual Safety inspection guide Voltage-selection switchGrounding requirements Safety notices multi-lingual translationsHandling electrostatic discharge-sensitive devices To Connect To Disconnect ≥18 kg 37 lbs ≥32 kg 70.5 lbs ≥55 kg 121.2 lbs Safety information ≥18 kg 37 lbs ≥32 kg 70.5 lbs ≥55 kg 121.2 lbs Para Conectar Para Desconectar PerigoPrecaución Safety information ThinkStation Hardware Maintenance Manual Safety information ThinkStation Hardware Maintenance Manual Connexion Déconnexion Vorsicht Achtung Arbeitsschutzrichtlinien beim Anheben der Maschine beachten Safety information Pericolo Per collegarsi Per scollegarsi AttenzionePrestare attenzione nel sollevare lapparecchiatura Safety information Peligro No debe Adopte procedimientos seguros al levantar el equipo Lenovo ThinkVantage Tools SpecificationsGeneral information Lenovo Welcome Lenovo Solution CenterProduct Recovery ThinkVantage Rescue and RecoveryAdditional information resources ThinkStation Hardware Maintenance Manual General Checkout Problem determination tipsThinkStation Hardware Maintenance Manual Diagnostics ThinkStation Hardware Maintenance Manual Using passwords Using the Setup Utility programStarting the Setup Utility program Viewing and changing settingsHard Disk Password Password considerationsPower-On Password Administrator PasswordSelecting a startup device Erasing lost or forgotten passwords clearing CmosEnabling or disabling a device Selecting or changing the startup device sequence Enabling ErP compliance mode and Deep SxSelecting a temporary startup device Exiting the Setup Utility program ThinkStation Hardware Maintenance Manual Installing Sata or SAS hard disk drives Configuring RAIDConfiguring RAID with Intel RSTe Entering the Intel RSTe configuration utility RAID Level Installing Sata or SAS hard disk drives Entering the LSI MegaRAID Bios configuration utility Setting the hot spare hard disk drive Beep symptoms Symptom-to-FRU IndexHard disk drive boot error Power Supply ProblemsLong and 9 short beeps Bios ROM error Post error codesBeep Symptom FRU/Action Long and 3 short beeps Keyboard errorMessage/Symptom FRU/Action Miscellaneous error messagesPost Error Message Description/Action Check power supply and signal cable connections Second device hard disk Undetermined problemsFirst device network ThinkStation Hardware Maintenance Manual Locations Front connector, control, and indicator locationsLocating major FRUs and CRUs Locating connectors on the rear of your computerLocating major FRUs and CRUs Number FRU description Self-service CRU Optional-service CRU System board part locations ThinkStation Hardware Maintenance Manual Drive bay locations Locating internal drivesThinkStation Hardware Maintenance Manual Handling static-sensitive devices Installing or replacing hardwareInstalling external options Replacing FRUsRemoving the computer cover Removing the computer cover Removing and reinstalling the front bezelWhat to do next Installing or replacing a PCI cardOpening the PCI card retainer Removing a PCI card Installing or replacing a memory module Removing the memory fan duct Removing a memory module Installing a memory module Installing or replacing the optical driveRemoving the optical drive Installing the optical drive retainer Replacing the card reader Connecting the optical driveRemoving the card reader Installing the card reader Replacing the batteryRemoving the old battery Replacing the heat sink and fan assemblyRemoving the heat sink and fan assembly Replacing the hard disk drive fan assembly Removing the hard disk drive fan assembly Replacing the rear fan assemblyRemoving the rear fan assembly Installing the rear fan assembly Installing or replacing a hard disk driveRemoving the hard disk drive Installing the hard disk drive into the bracket Installing the hard disk drive Removing the hard disk drive enablement module Installing or replacing a hard disk drive enablement moduleInstalling a new hard disk drive enablement module Replacing the front audio and USB assemblyReplacing the internal speaker Removing the internal speaker Installing or replacing the microprocessorInstalling the second microprocessor Opening the handles Removing the microprocessor Installing the microprocessor Replacing a microprocessor Opening the handles Opening the microprocessor retainer Do not touch the pins Replacing the system board ThinkStation Hardware Maintenance Manual Closing the microprocessor retainer Installing the microprocessor socket cover Replacing the power supply assemblyRemoving six screws that secure the power supply assembly Completing the parts replacement Additional service information Recovering from a POST/BIOS update failure Updating flashing the Bios from your operating systemSystem memory speed Power managementAutomatic configuration and power interface Acpi Bios Automatic Power-On featuresDimm operating voltage Microprocessor model Memory frequency Appendix A. Notices Trademarks Television output noticeEuropean conformance CE mark 111 IndexReplacing Battery
Related manuals
Manual 136 pages 31.97 Kb

4229, 4223, 4228 specifications

Lenovo has long been recognized for its commitment to producing high-quality computing solutions, and the ThinkPad line is no exception. Among its various models, the Lenovo ThinkPad series 4228, 4223, and 4229 stand out for their robust features and reliable performance, making them ideal choices for business and professional use.

The Lenovo ThinkPad 4228 series is engineered with a focus on durability and performance. One of its key features is the powerful Intel Core processor range, which ensures that users can manage demanding applications and multitask efficiently. Alongside this, the device typically comes equipped with ample RAM, providing speed and responsiveness that enhances productivity.

Moving to the ThinkPad 4223, it streamlines user experience with advanced connectivity options. The inclusion of multiple USB ports, HDMI, and Ethernet capabilities allows for seamless integration with various devices and networks. The 4223 model often houses a backlit keyboard, enabling users to work effortlessly in low-light environments. This model puts a strong emphasis on portability, making it a reliable companion for professionals on the move.

The ThinkPad 4229 takes connectivity a step further by offering options like Wi-Fi 6 and Bluetooth, ensuring fast and stable connections whether in the office or on the go. This model is often equipped with a higher resolution display, contributing to a better viewing experience for video conferencing and presentations. Its extended battery life is a notable feature, allowing users to remain productive without the constant need for recharging.

All three models in the 422x series boast Lenovo’s robust security features, including fingerprint readers and TPM (Trusted Platform Module), which safeguard sensitive data against unauthorized access. Furthermore, the reputation of Lenovo ThinkPads for their exceptional keyboard layout ensures that users can type comfortably over extended periods, reducing strain and increasing efficiency.

In summary, the Lenovo ThinkPad 4228, 4223, and 4229 models represent a blend of power, durability, and user-friendly design. With their focus on connectivity, performance, and security, these laptops cater perfectly to the needs of professionals and businesses, confirming Lenovo's status as a leading manufacturer in the world of computing technology. Whether you need a rugged workhorse for heavy tasks or a portable device for meetings, the ThinkPad series provides versatile solutions to meet any requirement.