Lenovo 4420HB2, L2440p manual Selecting a supported display mode

Table 2-2. OSD functions (continued)

OSD Icon on	Submenu	Description			Controls and	Controls and
Main Menu					Adjustments	Adjustments
					(Analog)	(Digital)
Options	Menu Position	Adjusts menu location on the screen.				Same as Analog
	Default	Returns the menu position to the default settings.
	Custom		· Horizontal: Changes the horizontal position of the OSD.
			· Vertical: Changes the vertical position of the OSD.
			· Save
			· Cancel
	Factory Default		· Reset
		Resets monitor to the original factory settings.
	Accessibility	Change button repeat rate and menu time-out settings.
			Button repeat rate:
		Select or		to change.
		·	Off
		·	Default
		·	Slow
			Menu time out: Sets the length of time the OSD will
		remain active after the last time a button is pressed.
		Exit the main menu				Same as Analog
Exit

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to re-attach the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x 1200 at 60 Hz, which is the Native Resolution Display mode.

Chapter 2. Adjusting and using your monitor 2-6