Other Functions
Sound Control
IMPORTANT!
For proper surround sound, make sure the speakers and subwoofer are connected (see page 11.)
Selecting surround sound
●Press SURROUND to select surround or stereo mode.
➜The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc.
➜The center and surround speakers operate only in
➜The available output modes for multi- channel include: Dolby Digital, Dolby Pro Logic or Dolby Pro Logic II surround sound.
➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode.
However, monaural (single channel sound) sources will not produce any sound from the rear speakers.
Volume control
●Adjust VOLUME control (or press VOL
or decrease the volume level.
➜ "VOL XX" appears. “XX” denotes the volume level.
To listen through the headphones
●Connect the headphones plug to the PHONES socket at the front of the
DVD system.
➜ The speakers will be mute.
To turn off the volume temporarily
●Press MUTE.
➜Playback will continue without sound and "MUTE" appears.
➜To restore the volume, press MUTE again or increase the volume level.
Dimming system’s display screen
●In any active mode, press DIM to select desired brightness : HIGH, MID or LOW.
E n g l i s h
Selecting digital sound effects
Select a preset digital sound effects that matches your disc’s content or that optimizes the sound of the musical style you are playing.
●Press SOUND to select the available sound effect.
When playing movie discs, you can select: CONCERT, DRAMA,ACTION or
When playing music discs or while in TV, TUNER or AUX mode, you can select: ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
33