Chapter 2
Installation
2.1 Install and uninstall the pedestal
To attach the base to your monitor, please following the steps for installation of the
pedestal as below:
step 1 | step 2 | step 3 |
2.2Connect your monitor to computer
2.2.1Turn off your computer and unplug its power cable.
2.2.2Connect the signal cable to the video port on the back of your computer.
2.2.3Connect the power cable for your monitor. ( to AC power jack)
2.2.4Connect one end of the audio cable on the back of the connector to the sound card of the computer output, (Only for monitor with speaker function)
2.2.5Plug the computer and monitor power cables into a nearby outlet.
2.2.6Turn your computer and monitor on, if your monitor display an image, you have successfully installed the monitor. If the monitor does not display an Image, check all the connections.
(1) VGA Signal Cable | (2) AC Power cable |
(3) Audio in
Note: (3) only for monitor with speaker function
Connecting the monitor to the computer and the power supply
2