To connect: | To disconnect: | |||
1. | Turn everything OFF. | 1. | Turn everything OFF. | |
2. | First, attach all cables to devices. | 2. | First, remove power cords from outlet. | |
3. | Attach signal cables to connectors. | 3. | Remove signal cables from | |
4. | Attach power cords to outlet. |
| connectors. | |
4. | Remove all cables from devices. | |||
5. | Turn device ON. | |||
|
| |||
|
|
|
|
Lithium coin cell battery notice
DANGER
Danger of explosion if battery is incorrectly replaced.
When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
Do not:
•Throw or immerse into water
•Heat to more than 100°C (212°F)
•Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing CR (manganese dioxide) lithium coin cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Modem safety information
CAUTION:
To reduce the risk of fire, use only No. 26 AWG or larger (for example, No. 24 AWG) telecommunication line cord listed by Underwriters Laboratories (UL) or certified by the Canadian Standards Association (CSA).
4ThinkCentre Safety and Warranty Guide