QMS SC-100 user manual Automatic Power Saving

AUTOMATIC POWER SAVING

QMS SC-100 features automatic power saving without unplugging the power cable. If you have not used QMS SC-100 over an hour, the QMS SC-100 automatically turns into power saving status to save the power. At this moment, the Message window displays “Power Saving…” while the Ready LED is flashing.

To resume the ready status, press any one of the button on the Control Panel. The Message window displays “Warming up…” and then “1 Copy @100%”, the ready status. The Ready LED now turns steadily on.

*Tips:

∙About the “Select” button: The major function of the “Select” button is to select the printer model. However, as long as your printer model has PCL emulation, it is not required to select the printer model - to touch the “Select” button.

∙About the default settings: The default settings can be easily recognized by the ending “*” mark when the setting is displayed in the Message display window. It is OK yet not recommended if you want to change the default setting. To change the factory default setting, simply press the “Select” button after your desired setting is shown in the Message display window. After one minute, the setting will be automatically reverted to the factory default setting.

4-14