Sanyo PLV-75/PLV-80, PLV75L/PLV-80L owner manual Video Input, When Select Input 3 AV Terminals

Page 31

VIDEO INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT button on Top Control or on Remote Control Unit.

Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

INPUT button

Input 1

Input 2

Input 3

SELECTING INPUT SOURCE

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connecting to those equipment, select a type of Video source in SOURCE SELECT Menu.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT buttons to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT UP/DOWN buttons to move a red arrow pointer to

 

Input 2 and then press SELECT button. Source Select Menu will

 

appear.

 

Move a pointer to source that you want to select and then press

INPUT MENU

Input

Input 1

Input 2

Input 3

SVGA 1

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

3 SELECT button.

Video When video input signal is connected to VIDEO jack,

select Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

NOTE;

INPUT SOURCE changes if the INPUT 2 button on Remote Control Unit is pressed.

Input 2

Source Select Menu

Move a pointer (red arrow) to Video or

Y, Pb/Cb, Pr/Cr and press SELECT button.

WHEN SELECT INPUT 3 (AV TERMINALS )

When connecting to those equipment, select a type of Video source in SOURCE SELECT (VIDEO) Menu.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT buttons to move a red frame pointer to

 

INPUT Menu icon.

2

Press POINT UP/DOWN buttons to move a red arrow pointer to

 

Input 3 and then press SELECT button. Source Select Menu will

 

appear.

3

Move a pointer to source that you want to select and then press

 

SELECT button.

Video When video input signal is connected to VIDEO jack, select Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

S-VideoWhen video input signal is connected to S-VIDEO jack, select S-Video.

NOTE;

INPUT SOURCE changes if the INPUT 3 button on Remote Control Unit is pressed.

INPUT MENU

InputSVGA 1

 

Input 1

 

INPUT Menu icon

 

 

 

 

 

Input 2

 

Move a pointer (red arrow) to

 

 

 

 

 

Input 3

 

 

 

 

 

Input 3 and press SELECT

 

 

 

 

button.

Input 3

Source Select Menu (VIDEO)

Move a pointer (red arrow) to source and press SELECT button.

31

Image 31
Contents Model PLV-75/PLV-80 PLV75L/PLV-80L Lensless Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorRoom Light Preparation Positioning ProjectorInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorMonitor Output Audio Output Serial port Connecting to ComputerDigital Connecting to Video EquipmentBefore Operation Operation of Remote ControlCompartment Before Operation Remote Control Batteries InstallationBefore Operation TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation For PC Source Guide Window Before Operation Menu BARTurning on the Projector What is PIN code?Basic Operation Turning on / OFF ProjectorBasic Operation Turning OFF the Projector Keystone Adjustment Adjusting ScreenDirect Operation Sound AdjustmentBasic Operation Picture Freeze Function No Show FunctionInput Menu Computer InputSelecting Input Source Selecting Computer SystemPC System Menu Automatic MULTI-SCAN SystemAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Reset Image Select Menu Picture Image SelectImage Level Select Direct Image Level Select MenuScreen Menu Picture Screen AdjustmentPicture Screen Select Direct Picture Screen Select MenuVideo Input When Select Input 3 AV TerminalsAV System Menu Component Video Selecting Video SystemAuto AV System Menu Video or S-VIDEOCinema Natural wide ZoomImage Adjust Menu Picture Image AdjustmentsPicture Image Color M. Menu Color Palette DEL Color MMenu Color Palette ListWhite balance Blue Color tempWhite balance Red White balance GreenSetting Menu SettingChange the Logo PIN code LogoLogo PIN Code Lock Enter a Logo PIN codeSimple menu Power managementCeiling RearSecurity Remote controlPIN code lock To Change the PIN Code Lock settingTo Change the PIN Code Lamp counter Factory defaultAppendix MaintenanceCleaning Projection Lens Appendix AIR Filter Care and CleaningAppendix Lamp ReplacementLamp Replace Lamp counter Appendix Lamp Replace CounterProblem Try these Solutions TroubleshootingDoes not work ServiceSystem PC AdjustMenu Tree InputSound SettingImage Adjust ScreenResolution Appendix Compatible Computer SpecificationsSXGA1 Indicators and Projector ConditionCator lights green and the projector can be turned on Input 1 Jacks Technical SpecificationsAppendix PJ Link Notice Computer INPUT-1 Terminals Analog Appendix Configurations of TerminalsAppendix Optional Parts Lens ReplacementWhile the projector is locked with the PIN code Factory default set No 1 2 3Factory default set No 4 3 2 Appendix PIN Code Number MemoPart No 324 1739 1AA6P1P4949-- M4YA

PLV75L/PLV-80L, PLV-75/PLV-80 specifications

The Sanyo PLV75L and PLV80L projector models, known for their versatility and high-quality performance, cater to both home theater enthusiasts and professional presentations. As one of Sanyo’s notable entries into the projector market, these models emphasize clarity, brightness, and engaging visuals.

A key feature of the PLV75L and PLV80L is their impressive brightness, boasting output levels of up to 2000 ANSI lumens. This allows for exceptional visibility even in well-lit environments, making them suitable for both professional settings such as conference rooms and personal use in home theaters. The incorporation of a high-quality LCD technology ensures that colors are vibrant and lifelike, with a native resolution that enhances the clarity of HD content.

These projectors also employ a contrast ratio that provides deep blacks alongside bright whites, ensuring a dynamic viewing experience. Whether displaying a film or a presentation, the visual detail remains sharp, contributing to a more immersive experience for spectators. The color reproduction is further enhanced by Sanyo’s advanced image processing technologies, which aim to optimize picture quality.

Portability is another significant characteristic of the PLV75L and PLV80L. Their relatively lightweight design facilitates easy transportation, making them ideal for traveling professionals or educators frequently moving between venues. Additionally, users can take advantage of flexible installation options, including various lens shift capabilities and zoom functions, allowing for adaptability in different environments.

Connectivity options are extensive, with multiple inputs including HDMI, VGA, and composite options, enabling connections to a variety of media devices such as laptops, Blu-ray players, and streaming boxes. This versatility ensures that users can seamlessly integrate the projector into their existing setups.

The PLV series from Sanyo also emphasizes energy efficiency, incorporating features that reduce power consumption without sacrificing performance. This aligns with a growing demand for eco-friendly technology solutions.

Overall, the Sanyo PLV75L and PLV80L projectors combine powerful performance with user-friendly features, making them suitable for a range of applications, from business presentations to home entertainment. Their blend of portability, superior image quality, and advanced connectivity positions them as valuable tools in the realm of visual display technology.