Sanyo PLV-75/PLV-80 Logo PIN Code Lock, Enter a Logo PIN code, Change the Logo PIN code

Page 39

SETTING

Logo

Logo settings can be altered as follows:

Logo

Logo select

This function decides what to be displayed on the starting-up dis- play as follows:

Off . . . . . . .count-down only Default . . . .the factory-set logo User . . . . . .the image you captured

Capture

This function enables you to capture the image being projected and use it for a starting-up display or interval of presentations. After capturing the projected image, go to the Logo function and set it to “User”. Then the captured image can be displayed when turning on the projector next time.

To capture the image, select [Yes]. To cancel the Capture function, select [No].

NOTE;

•Before capturing an image, select Standard in the Image Select Menu to capture a proper image. (See page 29, 33.)

•A signal from a computer can be captured up to XGA (1024 X 768).

•Certain signals may not be captured properly.

•When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone correction.

•When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

•Once you exit the Logo menu after setting Logo lock to "On", you are required to enter the PIN code every attempting to change the Logo setting.

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

Logo PIN Code Lock

This function prevents an unauthorized person from changing the Logo setting.

Off

. . . . .the Logo setting can be changed freely from the

 

Logo menu.

On

. . . . .the Logo setting cannot be changed without the

 

Logo PIN code.

If you want to change the Logo PIN Code Lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set "4321" at the factory.

Enter a Logo PIN code

Select a number by pressing the POINT LEFT/RIGHT buttons and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the POINT DOWN button, then return to "Logo PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can change the Logo PIN code lock setting.

If you entered a wrong Logo PIN code, "Logo PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct Logo PIN code all over again.

Logo PIN Code Lock Dialog Box

Pointer

Quit

After a correct Logo PIN code is entered, the following dialog box will appear.

Select On/Off by pressing the POINT LEFT/RIGHT buttons or change the Logo PIN code.

Change the Logo PIN code

Logo PIN code can be changed to your desired four- digit number. Select "Logo PIN code change" with the POINT DOWN button and press the SELECT button. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN Code Lock function on page 42.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Model PLV-75/PLV-80 PLV75L/PLV-80L Lensless Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorRoom Light Preparation Positioning ProjectorInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorMonitor Output Audio Output Serial port Connecting to ComputerDigital Connecting to Video EquipmentBefore Operation Operation of Remote ControlCompartment Before Operation Remote Control Batteries InstallationBefore Operation TOP Controls and IndicatorsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation For PC Source Guide Window Before Operation Menu BARTurning on the Projector What is PIN code?Basic Operation Turning on / OFF ProjectorBasic Operation Turning OFF the Projector Keystone Adjustment Adjusting ScreenDirect Operation Sound AdjustmentBasic Operation Picture Freeze Function No Show FunctionInput Menu Computer InputSelecting Input Source Selecting Computer SystemPC System Menu Automatic MULTI-SCAN SystemAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Reset Image Select Menu Picture Image SelectImage Level Select Direct Image Level Select MenuScreen Menu Picture Screen AdjustmentPicture Screen Select Direct Picture Screen Select MenuVideo Input When Select Input 3 AV TerminalsAV System Menu Component Video Selecting Video SystemAuto AV System Menu Video or S-VIDEOCinema Natural wide ZoomPicture Image Adjustments Image Adjust MenuPicture Image Color M. Menu Color Palette DEL Color MMenu Color Palette ListWhite balance Blue Color tempWhite balance Red White balance GreenSetting Menu SettingChange the Logo PIN code LogoLogo PIN Code Lock Enter a Logo PIN codeSimple menu Power managementCeiling RearSecurity Remote controlTo Change the PIN Code Lock setting PIN code lockTo Change the PIN Code Lamp counter Factory defaultAppendix MaintenanceCleaning Projection Lens Appendix AIR Filter Care and CleaningLamp Replacement AppendixLamp Replace Lamp counter Appendix Lamp Replace CounterProblem Try these Solutions TroubleshootingDoes not work ServiceSystem PC AdjustMenu Tree InputSound SettingImage Adjust ScreenResolution Appendix Compatible Computer SpecificationsSXGA1 Indicators and Projector ConditionCator lights green and the projector can be turned on Input 1 Jacks Technical SpecificationsAppendix PJ Link Notice Computer INPUT-1 Terminals Analog Appendix Configurations of TerminalsAppendix Optional Parts Lens ReplacementWhile the projector is locked with the PIN code Factory default set No 1 2 3Factory default set No 4 3 2 Appendix PIN Code Number MemoPart No 324 1739 1AA6P1P4949-- M4YA

PLV75L/PLV-80L, PLV-75/PLV-80 specifications

The Sanyo PLV75L and PLV80L projector models, known for their versatility and high-quality performance, cater to both home theater enthusiasts and professional presentations. As one of Sanyo’s notable entries into the projector market, these models emphasize clarity, brightness, and engaging visuals.

A key feature of the PLV75L and PLV80L is their impressive brightness, boasting output levels of up to 2000 ANSI lumens. This allows for exceptional visibility even in well-lit environments, making them suitable for both professional settings such as conference rooms and personal use in home theaters. The incorporation of a high-quality LCD technology ensures that colors are vibrant and lifelike, with a native resolution that enhances the clarity of HD content.

These projectors also employ a contrast ratio that provides deep blacks alongside bright whites, ensuring a dynamic viewing experience. Whether displaying a film or a presentation, the visual detail remains sharp, contributing to a more immersive experience for spectators. The color reproduction is further enhanced by Sanyo’s advanced image processing technologies, which aim to optimize picture quality.

Portability is another significant characteristic of the PLV75L and PLV80L. Their relatively lightweight design facilitates easy transportation, making them ideal for traveling professionals or educators frequently moving between venues. Additionally, users can take advantage of flexible installation options, including various lens shift capabilities and zoom functions, allowing for adaptability in different environments.

Connectivity options are extensive, with multiple inputs including HDMI, VGA, and composite options, enabling connections to a variety of media devices such as laptops, Blu-ray players, and streaming boxes. This versatility ensures that users can seamlessly integrate the projector into their existing setups.

The PLV series from Sanyo also emphasizes energy efficiency, incorporating features that reduce power consumption without sacrificing performance. This aligns with a growing demand for eco-friendly technology solutions.

Overall, the Sanyo PLV75L and PLV80L projectors combine powerful performance with user-friendly features, making them suitable for a range of applications, from business presentations to home entertainment. Their blend of portability, superior image quality, and advanced connectivity positions them as valuable tools in the realm of visual display technology.
Top Page Image Contents