Sanyo PLC-XU60, PLC-SU60 owner manual Setting

Page 40

Setting

Logo

This function decides what to be displayed when starting up.

User ···· the image you captured Default ···· the factory-set logo

Off ···· count-down only

Capture

This function is used to capture the image being projected and use it for a starting-up display or interval of presentations. After capturing the projected image, go to the Logo function and set it as “User”. Then the captured image will be displayed when turning on the projector next time or pressing the NO SHOW button. (p22)

To capture the image, select [Yes]. To cancel the Capture function, select [No].

Before capturing an image, select Standard in the Image Select Menu to capture a proper image. (See page 30, 36.)

A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment.

Capture

Select [Yes] to capture the projected image.

Press the SELECT button at this icon to display other items.

Select [Yes] to stop capturing.

Ceiling

When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector.

Rear

When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector can be used as computer input or monitor output by switching Terminal with the Point Left/Right button.

To use the terminal as computer input or RGB Scart 21-Pin Video input, select Computer 2. To use the terminal as monitor out, select Monitor out.

Terminal cannot be switched into Monitor out after selecting Computer 2. In this case, select other input source such as Computer 1 or Video, and you will select Terminal.

Standby mode

This function is available when using Multi Card Imager optionally supplied, and it reduces standby energy when selecting Eco.

Eco ···· reduces standby energy.

Normal ···· consumes normal standby energy.

Ceiling

Rear

Standby mode

Press the SELECT button at this icon to display previous items.

Move the pointer to item and then press POINT LEFT/RIGHT button(s).

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model PLC-XU60 PLC-SU60 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorCompliance Federal Communication Commission NoticeCompliance For Continental Europe For the U.KFor the U.S.A. and Canada 200 240 V ACFeatures and Design Part Names and Functions Front Back BottomPart Names and Functions TerminalTop 1!2Remote Control Zoom FreezeLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationAdjustable Feet InstallationPositioning the Projector Connecting to a Computer InstallationTerminals Projector Connecting to Video Equipment Video Source exampleTurning On the Projector Basic OperationTurning Off the Projector Zoom Adjustment Focus AdjustmentKeystone Adjustment Basic OperationPicture Freeze Function Auto Set Up FunctionKeystone correction Corner Timer Function Sound AdjustmentNo Show Function Direct OperationRemote Control On-Screen MenuTop Control On-Screen MenuMenu Bar Computer Input Input Source SelectionComputer Input Computer System SelectionAuto ModeTo store adjustment data Computer Adjustment AutoAuto PC Adj Computer Adjustment Manual Reset Mode freeDisplay area To store adjustment data To clear adjustment dataImage Level Selection StandardReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video, Y, Pb/Cb, Pr/Cr Video InputPb/Cb, Pr/Cr Video Input Input Source Selection RGB Scart 21-PinRGB Scart Input button Computer Video Computer 2 buttonVideo System Selection Video or S-VideoComponent AV System Menu Video or S-VideoCinema Image button Standard CinemaTint ColorProgressive Resets all adjustment to their previous figure Setting SettingSetting Power management Lamp modeOn start PointerTo change the code for the remote control Wireless Mouse modeProjector mode To change the code for the projectorProjector is shut down and the Warning indicator lights red Maintenance and CleaningThen check the items below Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterLamp Handling Precautions Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionPC Adjust Image Adjust ScreenMenu Tree InputSystem Setting Image AdjustImage Select SoundFreq Compatible Computer SpecificationsKHz Technical Specifications Terminal HDB15-PIN Pin Configuration Configurations of TerminalsTerminal DVI-I Pin Configuration Optional Parts Attaching the Lens Cover Key registration Deleting key registrationTo lock the projector with USB key Off Projector is not locked with USB Key On1Appendix Appendix Part No 312 4803 1AA6P1P4451-- MF7AA

PLC-XU60, PLC-SU60 specifications

The Sanyo PLC-SU60 and PLC-XU60 are projectors that embody cutting-edge technology and innovative features, catering to a variety of presentation needs in educational and corporate environments.

The PLC-SU60, a high-performance model, boasts a native resolution of 1024 x 768 pixels, providing clear and crisp images. It utilizes a 3LCD system, which enhances color accuracy and brightness. With a brightness of 6000 lumens, this projector is particularly well-suited for large venues with ambient light, ensuring that presentations remain vibrant and legible even in well-lit rooms. The model also incorporates advanced lens shift and zoom capabilities, allowing for flexible installation options without compromising image quality.

On the other hand, the PLC-XU60 targets a similar audience but emphasizes portability alongside performance. This projector features a native XGA resolution with a brightness of 5000 lumens. It, too, utilizes the 3LCD technology, ensuring bright and colorful images. The lightweight design of the PLC-XU60 makes it an ideal choice for on-the-go presenters who need a reliable device that can easily transition from one location to another.

Both models are equipped with multiple connectivity options, including HDMI, VGA, and component inputs, which make them compatible with a wide array of devices from laptops to Blu-ray players. The easy-to-navigate user interface simplifies operation, providing users with instant access to settings suitable for different environments.

A noteworthy characteristic of Sanyo projectors is their commitment to minimizing noise during operation. The PLC-SU60 and PLC-XU60 operate at whisper-quiet levels, allowing for uninterrupted presentations. Additionally, both projectors come with a long lamp life, which reduces maintenance costs and extends usage time.

In summary, the Sanyo PLC-SU60 and PLC-XU60 are designed for those who need reliable, high-quality projection solutions. With their impressive brightness, outstanding color accuracy, and versatile connectivity, these projectors cater to the diverse requirements of modern-day presentations. Whether in an educational setting or a business environment, these models ensure that visuals are portrayed vividly and effectively, reinforcing the importance of investing in robust projection technology.
Top Page Image Contents