Philips MCM710 Troubleshooting, Replace the battery, Set the clock correctly Switch on the timer

Page 24

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

“NO DISC” is displayed.

Radio reception is poor.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

The timer is not working.

The Clock/Timer setting is erased.

Solution

✔Insert a disc.

✔Check if the disc is inserted upside down.

✔Wait until the moisture condensation at the lens has cleared.

✔Replace or clean the disc, see “Maintenance”.

✔Use a finalised CD-RW or correct format disc.

✔Increase the distance between the Micro HiFi System and your TV or VCR.

✔Hang up one end of the T-shape antenna and keep the other end at horizontal angle to it.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connected correctly.

✔Check if the stripped speaker wire is clamped.

✔Check the speaker connections and location.

✔Select the source (CD or FM, for example) before pressing the function button (ÉÅ, 5 / 6).

✔Reduce the distance between the remote control and the system.

✔Insert the battery with its polarities (+/– signs) aligned as indicated.

✔Replace the battery.

✔Point the remote control directly toward IR sensor on the front of the system.

✔Set the clock correctly.

✔Switch on the timer.

✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Micro Hi-Fi System How to connect a plug Important notes for users in the U.KMains plug Copyright in the U.KPage Klass 1 laseraparat Index Contents Supplied accessories Safety InformationEnvironmental Information Disposal of your old productHearing Safety Listen at a moderate volumeTo establish a safe volume level General InformationPower Rear connectionsSpeaker FM antenna connectionPreparations Speakers ConnectionFor optimal sound performance, use the supplied speakers Optional connectionPreparations Controls on the system and remote control ¤ Preset + Controls≥ Numerical Keypad 0~9 ShiftSwitching the system on Switching the system to Eco Power Standby modePower Saving Automatic Standby Adjusting volume and soundCD/MP3-CD Operation Loading a discBasic playback controls Playing an MP3 disc Different play modes Shuffle and Repeat Programming track numbersErasing the program To start playback of your disc program, press ÉÅ directlyTuning to radio stations All your presets will be overriddenFM Radio Reception Programming radio stationsTuning to preset radio stations Setting the RDS clockRadio Reception Scrolling through different RDS informationUsing a non-USB device Using a USB mass storage deviceExternal Sources Supported formatsRoot TitleAlbum For compatibility reasons, the album/trackClock/Timer Setting the clockSetting the timer Viewing the clockSpecifications Cleaning the Cabinet Cleaning the disc lensCleaning Discs Troubleshooting Replace the batterySet the clock correctly Switch on the timer Some files on the USB device are not displayed Device not Supported scrolls onDisplay Français Meet Philips at the Internet

MCM710 specifications

The Philips MCM710 is a compact micro music system that stands out for its blend of functionality and modern design. It is an excellent choice for audiophiles looking for a space-saving audio solution without compromising on sound quality.

One of the main features of the MCM710 is its powerful audio performance. The system is equipped with two powerful speakers that deliver clear, rich sound, making it suitable for a range of music genres. With the total output power of 30 watts RMS, the MCM710 ensures immersive sound experience, whether you are listening to your favorite tunes or hosting a gathering.

The MCM710 supports a variety of playback options, making it versatile for different listening preferences. It features a built-in CD player capable of playing regular CDs and CD-R/RW discs, providing users with the option of enjoying their existing CD collection. Additionally, it includes a USB Direct slot for easy playback of music files from USB devices, ensuring compatibility with digital music libraries. The system also features FM radio, allowing users to tune into their favorite stations with ease.

Another highlight of the Philips MCM710 is its easy-to-use interface. The system is designed with a clear LCD display that provides essential information such as track details and radio station names. Users can navigate through their music options effortlessly using the remote control, enhancing convenience and user experience.

The MCM710 is also equipped with advanced audio technologies aimed at optimizing sound quality. One such technology is the Dynamic Bass Boost feature, which enhances lower frequencies to provide a deep and powerful bass experience, ensuring that bass-heavy tracks sound their best.

In terms of design, the MCM710 boasts a sleek and stylish appearance that fits well into any modern living space. Its compact size allows it to be placed on shelves, side tables, or wherever music is enjoyed without taking up too much room.

Overall, the Philips MCM710 is a well-rounded micro music system that combines high-quality sound, versatile playback options, user-friendly features, and an attractive design. It is a perfect choice for anyone looking to enrich their listening experience while maintaining a minimalist aesthetic in their home.
Top Page Image Contents