Installation
Positioning the Projector
For the projector positioning, see the figures below.
The projector should be set perpendicularly to the plane of the screen.
A | A |
✔Note:
60”
0.265’ ( 8.1 cm)
80”
B
(Inch Diagonal)
•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.
•The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image.
•All measurements are approximate and may vary from the actual sizes. Make sure to check the position of images by projecting images on the screen before installing the projector and screen, since each projector shows slight variations.
•Make sure to project images on a flat screen.
•Even slight warpage or irregularities of the screen may have an effect on the quality of the projected images.
Screen Size | 60” | 70” | 80” | |
(W x H) mm |
|
|
| |
1219 x 914 | 1422 x 1067 | 1626 x 1219 | ||
4:3 aspect ratio | ||||
|
|
|
| |
A | 0.068’ (2.1 cm) | 0.265’ (8.1 cm) | ||
|
|
|
| |
B | 1.010’ (30.8 cm) | 1.106’ (33.7 cm) | 1.198’ (36.5 cm) | |
|
|
|
|
Adjustable Feet
Projection angle can be adjusted up to 1.0 degree with the adjustable feet.
Rotate the adjustable feet to adjust the position and tilt.
Keystone distortion of the projected image can be corrected by menu operation (pp.24, 45).
Adjustable Feet
14