Sanyo PLC-XL50 owner manual Screen Size Adjustment

Store

To store the adjusted data, select “Store” and press the SELECT button. The Image Level Menu appears. Use the Point ed buttons to choose one of the four image level and press the SELECT button. A confirmation box appears and then select “Yes.”

The stored data can be called up by selecting “Image” in the Image Level Selection on page 32-33.

Move the red frame pointer to the desired image level (from Image 1 to 4) and then press the SELECT button.

Quit

Exit the Image Adjust Menu.

Store item

A confirmation box appears, then select “Yes.”

Screen Size Adjustment

Press the SELECT button at this item to store the adjusted data.

SELECT button.

Normal

Provide the image to fit the screen size with the original aspect ratio of input signal.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear.

Wide

Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

Full

Provide the full screen image.

Screen Menu

Screen Menu icon

Move the red frame pointer to the function and press the SELECT button.

✔Note:

•The Screen Menu, except for "Normal", cannot be operated when 720p, 1035i, or 1080i is selected in the PC System Menu (p.28).

•This projector cannot display any resolution higher than 1600 x 1200. If your computer’s resolution is higher than that, lower the resolution before connecting to the projector.

•The image data other than 1024 x 768 is modified to fit the screen size in initial mode.

•True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.28).