Philips MCM275 Troubleshooting, Problem, Solution, Check the speaker connections and location

Page 28

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

“NO DISC” is displayed.

Some files on the USB device are not displayed.

Radio reception is poor.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

Solution

✔Insert a disc.

✔Wait until the moisture condensation at the lens has cleared.

✔Replace or clean the disc, see “Maintenance”.

✔Use a finalised CD-RW or a correct MP3/WMA -CD format disc.

✔Check if the number of folders exceeds 99 or the number of titles exceeds 999

✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

✔Increase the distance between the Micro HiFi System and your TV or VCR.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connected correctly.

✔Check if the stripped speaker wire is clamped.

✔Make sure the MP3-CD was recorded within 32~256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

✔Check the speaker connections and location.

28

Image 28

Contents Necesita ayuda Inmediata? MCM275Need help fast? Besoin dune aide Philips MCM275 Page Class II equipment symbol Clean only with a piece of dry clothMaterials Additional ProofPurchase Notification Benefits Product Ownership Dear Philips product owner Index EnglishFrançais EnglishContents Supplied accessories Safety InformationGeneral Information Environmental InformationControls on the set illustrations ControlsHelpful hints Remote control Standby or Eco Power mode switchesVolume + Example ÉÅ, í, ëPlacing MCM275 Open CLOSEçTwo ways on desktops with stand or on walls without stand Mounting stand onto the setInstallation Rear connectionsSpeaker Speaker connectionsConnecting an additional appliance Connecting a USB device or memory CardFM antenna For the devices with USB cableConnecting a non-USB device Using AC powerSelect AUX mode on the set Using the remote control Setting the clockTo replace the remote controls’ Battery PreparationSwitching on/off the set and selecting functions Switching between Standby and ECO Power modeBasic Functions Auto-standbyVolume control Volume adjustmentSound control Displaying the clockDiscs for playback Playing discsAbout MP3/ WMA Supported formatsSelecting a different track Selecting and searchingFinding a passage within a track During playback MP3/WMA press ALBUM/ Preset Programming tracksErasing the program Press STANDBY-ON yDifferent play modes REPEAT, Shuffle Display track information MP3/WMA onlyRepeat TRACK- plays the current track continuously Shuffle plays all the tracks of the CD in random orderTuner Tuning to radio stationsProgramming radio stations Using a USB mass storage device Playing a USB mass storage deviceCompatible USB mass storage devices RootUSB AUX AUX Listening to an external sourceTimer Setting the timerHelpful hints Timer will not work at the set time if Set will switch to Tuner source automatically ifCleaning the Cabinet Cleaning the disc lens SpecificationsCleaning Discs Troubleshooting ProblemSolution Check the speaker connections and locationReplace the battery How to mount your MCM275 onto walls AppendixPhilips Limited Warranty