English
Appendix
How to mount your MCM275 onto walls
IMPORTANT!
–The wall mounting instructions are for the use of the qualified wall mounting person only!
–Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall and mounting the set onto walls.
What’s in the supplied mounting kits
210 mm (8.26")
1 x template
2 x screws
What else you’ll need
– Drilling tools (e.g. electric drill)
Preparation
1To find a suitable location for mounting, try your necessary rear connections (see the chapter Installation).
2Ask a qualified person to help you with the wall mounting, who should:
–to avoid unexpected damage, learn about the piping, wiring and other relevant information inside your walls;
–according to the drilling requirements, choose suitable drilling tools;
–take other precautions necessary for the wall mounting work.
Mounting your MCM275
1Align the template in the chosen location on a wall. Use a pencil to mark the drilling positions (as shown)
210 mm (8.26")
2Drill two 6mm diameter holes as marked
3 Secure the dowels and screws in the holes respectively, leaving the screws 5mm proud of the wall
4To detach the stand,
a.As shown, hold down the 3 PRESS buttons
b.Move out the stand to detach
PRESS | PRESS |
5Hang the unit on the fastening screws
6As shown, hook and mount the speakers in
place
Speaker | Left |
|
Main | Unit |
|
Speaker | Right |
|
Holes
30