Hitachi CP-X275 user manual Option Menu, Auto OFF, Whisper

Page 36

MULTIFUNCTIONAL SETTINGS (continued)

OPTION Menu

With the OPTION menu, the five items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN

VOLUME

PICTURE-1

AUTO OFF

PICTURE-2

WHISPER

INPUT

LAMP TIME

SCREEN

FILTER TIME

OPTION

 

12

: SELECT

Example : OPTION Menu

(VOLUME)

OPTION Menu

Item

 

 

Description

VOLUME

Adjust Volume: High

⇔

Low

AUTO OFF

Adjust AUTO OFF Time:

Long (MAX. 99 min.) ⇔ Short (Min. 1 min.) ⇔ (DISABLE: 0 min.) The system automatically enters the standby mode if no signal is received within the set time. This function is inactive when DISABLE (0 min.) is selected.

WHISPER

Select WHISPER Mode:

NORMAL ⇔ WHISPER

When WHISPER is selected the WHISPER mode is activated. In the WHISPER mode, acoustic noise and screen brightness are reduced.

Refer to LAMP TIME: When set, this function displays the total time the projector lamp has been used since new.

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a

LAMP TIME new lamp, select RESET on the menu with the button.

•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.

•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select

FILTER TIME RESET on the menu with the button.

RESET ⇔ CANCEL

•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.

•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

6

Page 35 Page 37
Image 36
Page 35 Page 37
Contents CP-S225WA/CP-X275WA Manuale Distruzioni Vol.1 Informazioni di baseBrukerhåndbok Vol.1 Grunnleggende Contents Projector Features Only use the power cord that came with the projector Devices you will be using to the projectorAC inlet Part Names ProjectorAudio port Audio R port L port Video port RGB buttonVideo button Setting UP the Projector Angle AdjustmentPress the foot adjuster button Adjusting the Screen Size and Projection Distance ScreenTop view Side viewConnecting Your Devices DVD players VCRs Laptop computers Desktop computersPorts and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRUsing the Remote Control Putting batteries into the remote control unitRemove the battery cover Close the battery coverOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Adjusting the Volume Press the Volume buttonPress Buttons to adjust Volume Temporarily Muting the SoundAdjusting the Position Use Buttons to adjust PositionPress the Position button Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonUse the , buttons to correct DistortionUsing the Magnify Feature Freezing the ScreenSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Using the Menu Functions Select a menu using Buttons Then press Or Enter buttonSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp AIR Filter Caring for the air filterReplacing the air filter New air filter one specified for your projectorCaring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensRegulatory Notices For Technical see the end of this manual Multifunctional Settings Main MenuMain Menu PICTURE-1 Menu PICTURE-2 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu Option MenuAuto OFF WhisperRelated Messages Regarding the Indicator Lamps Power Lamp TempPhenomena That May Easily Be Mistaken for Machine Defects Vol.2-2Vol.2-3 Vol.2-6Specifications Dimension DiagramSpecification Unit mmWarranty and AFTER-SERVICE Signal Connector PIN Assignment Signal Terminal SpecificationRGB in 1/2 Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals Command data Consist of header 7 bytes + command data 6 bytesRS-232C Communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCommand data chart RS-232C CommunicationBe EF BA D2 Be EF AD D0 Be EF Ntsc PAL Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-X275 specifications

The Hitachi CP-X275 is a versatile and reliable projector designed for a wide range of presentation needs in educational institutions and corporate environments. With its advanced features and user-friendly operation, the CP-X275 stands out as a powerful tool for enhancing visual communication.

At the heart of the CP-X275 is its impressive brightness, boasting a luminosity of 3,000 ANSI lumens. This high brightness level ensures that images remain clear and vibrant even in well-lit rooms. Coupled with a native XGA resolution of 1024 x 768 pixels, the projector provides sharp and detailed visuals, making it an ideal choice for displaying text-heavy presentations and intricate graphics.

One of the most notable technologies employed in the CP-X275 is the 3LCD system. This technology enables the projector to deliver brilliant colors and smooth images by utilizing three separate LCD panels—one for each primary color (red, green, and blue). This results in high color accuracy and enhances the overall viewing experience.

The CP-X275 also prioritizes ease of setup and usability. It features a range of connectivity options including HDMI, VGA, and USB ports, allowing seamless integration with various devices such as laptops, computers, and media players. The inclusion of a USB Type-A port also enables direct playback of presentations from USB flash drives, eliminating the need for additional equipment.

Another characteristic that sets the CP-X275 apart is its long-lasting lamp. With an estimated lamp life of up to 5,000 hours in Normal mode and up to 10,000 hours in Eco mode, users can benefit from reduced maintenance costs and extended viewing periods before lamp replacement is necessary.

Additionally, the projector is equipped with keystone correction technology, which allows for quick adjustments to the image to eliminate distortion when projecting at an angle. This feature enhances flexibility in placement and ensures a professional-looking presentation every time.

The Hitachi CP-X275 shines in its performance, reliability, and user-friendly features. Its combination of high brightness, color accuracy, and versatile connectivity options make it an excellent choice for educators and professionals seeking a dependable projector that delivers exceptional quality in a variety of settings. Whether in a classroom, conference room, or auditorium, the CP-X275 is designed to meet the diverse needs of any audience.
Top Page Image Contents