Hitachi CP-X275 user manual Input Menu, Auto, Video, Hdtv

Page 34

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu

With the INPUT menu, the four items shown in the Table below can be performed. With inputting of RGB IN signal, the horizontal and vertical frequencies of the signal will be displayed on the initial screen of the INPUT menu.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN

AUTO

EXECUTE

PICTURE-1

VIDEO

 

PICTURE-2

HDTV

 

INPUT

SYNC ON G

 

SCREEN

 

 

OPTION

 

 

: SELECT

Example : INPUT Menu

(AUTO)

INPUT Menu

Item

 

 

 

Description

 

 

 

 

 

 

Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H

 

PHASE, and H SIZE. Use this function with the maximum window size.

 

 

Auto Adjust (for VIDEO/S-VIDEO):Automatically selects the proper VIDEO

 

mode for the current input signal. This function is active only when the AUTO

 

mode is selected for the item VIDEO. Refer to the description for the item

AUTO

VIDEO below.

 

 

 

 

 

 

 

• This function may not be available with a PAL60 signal and certain other

 

signals.

 

 

 

 

 

 

 

 

• The AUTO mode operation requires approximately 10 seconds.

 

 

• For COMPONENT VIDEO, the signal type is identified automatically even if

 

this function is inactive. For a HDTV signal, refer to the item HDTV below.

 

 

 

 

 

Select Mode of Signal Type (for VIDEO/S-VIDEO):

 

 

 

AUTO

NTSC

PAL

SECAM

 

NTSC4.43

M-PAL

N-PAL

 

 

 

Selecting AUTO mode activates and performs the AUTO function for VIDEO/S-

 

VIDEO. It automatically selects the proper mode from among those above.

VIDEO

Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.

The image becomes irregular, or lacks color.)

 

 

 

 

 

 

 

HDTV

AUTO mode may not function correctly with a PAL60 signal and certain other signals.

The AUTO mode operation requires approximately 10 seconds.

For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. For a HDTV signal, refer to the item HDTV below.

Select HDTV Signal Mode:

1080i 1035i

• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.

On/Off SYNC ON G Mode:

TURN ON TURN OFF

Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode

SYNC ON G allows reception of SYNC on G.

In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

4

Image 34
Contents Manuale Distruzioni Vol.1 Informazioni di base CP-S225WA/CP-X275WABrukerhåndbok Vol.1 Grunnleggende Contents Projector Features Devices you will be using to the projector Only use the power cord that came with the projectorAC inlet Part Names ProjectorRGB button Audio port Audio R port L port Video portVideo button Angle Adjustment Setting UP the ProjectorPress the foot adjuster button Top view Adjusting the Screen Size and Projection DistanceScreen Side viewConnecting Your Devices DVD players VCRs Laptop computers Desktop computersPorts and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRRemove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Press Buttons to adjust Volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundUse Buttons to adjust Position Adjusting the PositionPress the Position button Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonUse the , buttons to correct Correcting Keystone DistortionsPress the Keystone button DistortionUsing the Magnify Feature Freezing the ScreenSelecting the Aspect Ratio Signal SearchingTemporarily Blanking the Screen Select an item using Buttons, then press Or Enter button Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Press Buttons to adjust the levelLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Replacing the lamp AIR Filter Caring for the air filterReplacing the air filter New air filter one specified for your projectorCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensRegulatory Notices For Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu PICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuAuto Input MenuInput Menu VideoBlank Screen MenuScreen Menu Start UPAuto OFF Option MenuOption Menu WhisperRelated Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-6Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE RGB in 1/2 Signal Connector PIN AssignmentSignal Terminal Specification Sub 15-pin ShrinkExample of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals RS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCommand data chart RS-232C CommunicationBe EF BA D2 Be EF AD D0 Be EF Ntsc PAL Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France

CP-X275 specifications

The Hitachi CP-X275 is a versatile and reliable projector designed for a wide range of presentation needs in educational institutions and corporate environments. With its advanced features and user-friendly operation, the CP-X275 stands out as a powerful tool for enhancing visual communication.

At the heart of the CP-X275 is its impressive brightness, boasting a luminosity of 3,000 ANSI lumens. This high brightness level ensures that images remain clear and vibrant even in well-lit rooms. Coupled with a native XGA resolution of 1024 x 768 pixels, the projector provides sharp and detailed visuals, making it an ideal choice for displaying text-heavy presentations and intricate graphics.

One of the most notable technologies employed in the CP-X275 is the 3LCD system. This technology enables the projector to deliver brilliant colors and smooth images by utilizing three separate LCD panels—one for each primary color (red, green, and blue). This results in high color accuracy and enhances the overall viewing experience.

The CP-X275 also prioritizes ease of setup and usability. It features a range of connectivity options including HDMI, VGA, and USB ports, allowing seamless integration with various devices such as laptops, computers, and media players. The inclusion of a USB Type-A port also enables direct playback of presentations from USB flash drives, eliminating the need for additional equipment.

Another characteristic that sets the CP-X275 apart is its long-lasting lamp. With an estimated lamp life of up to 5,000 hours in Normal mode and up to 10,000 hours in Eco mode, users can benefit from reduced maintenance costs and extended viewing periods before lamp replacement is necessary.

Additionally, the projector is equipped with keystone correction technology, which allows for quick adjustments to the image to eliminate distortion when projecting at an angle. This feature enhances flexibility in placement and ensures a professional-looking presentation every time.

The Hitachi CP-X275 shines in its performance, reliability, and user-friendly features. Its combination of high brightness, color accuracy, and versatile connectivity options make it an excellent choice for educators and professionals seeking a dependable projector that delivers exceptional quality in a variety of settings. Whether in a classroom, conference room, or auditorium, the CP-X275 is designed to meet the diverse needs of any audience.