JBL SG3030, SG2020 manual Basic Operation, Programmed Play

Page 15

ENJOYING JBL SOUNDGEAR

Playing CDs

Basic Operation (cont.)

Repeating Tracks

The Repeat function is only available using the remote control, and cannot be accessed from the front panel buttons.

Once Repeat play has been selected, JBL Soundgear will continue to repeat the selection until you cancel it by pressing the Repeat but- ton %once, so that the Repeat indicator p in the display goes out.

Repeat play may be selected either during play or in the Stop mode. If a programmed play list is playing, you may select either one track to repeat, or all discs to repeat the entire play list.

Repeat One Track

Press the Repeat button %ONCE to display Repeat One p, and press the Play (or Ý■■ on remote control) button c ^to start play.

Repeat One Disc

Press the Repeat button %TWICE to display Repeat One Disc p, and press the Play (or Ý■■ on remote control) button c ^to start play.

Repeat All Tracks on All Discs

Press the Repeat button %THREE times to display Repeat All Disc p, and press the Play (or Ý■■ on remote control) button c ^ to start play.

Repeat Only Selected Tracks

Program the desired tracks as described in the next section, and press the Repeat button % while in Programming mode to display Repeat One or Repeat All Disc p.

If you program a play list during Repeat Play of an entire disc, the display will change to Repeat All Disc p.

Random Play

Press the Random button 37 before or during play, and JBL Soundgear will play the tracks on the selected disc in random order. The Random indicator ywill light in the display. To return to normal play, press the Random button 37 again.

If you tap the Forward Search button ¤(, JBL Soundgear will randomly select a new track. If you tap the Reverse Search button ¤&once, it will go to the beginning of the current track. Tap the Reverse Search button ¤&again, and JBL Soundgear will randomly select a new track.

Programmed Play

You may program a play list of up to 20 tracks anywhere on up to 3 discs.

1.While in Stop mode, press the CD/Tuner Program button bî.

2.Press one of the Disc Selector buttons 33 34 35 or the Disc Skip button 36 ïto select a disc. If the correct disc is already in position, then press the CD Skip/Search ÜÜ ÜÜ ¤&or ÝÝ ÝÝ■ ¤(buttons once to select the disc so that it appears in the display c.

3.Use the CD Skip/Search ÜÜ ÜÜ ¤&or

ÝÝ ÝÝ■ ¤(buttons to select the desired track. For example, to select Track 6, press the CD Skip/Search ÜÜ ÜÜ ¤&or ÝÝ ÝÝ

¤(buttons repeatedly until track number “06” is displayed c.

4.Press the CD/Tuner Program button bî to store the track in the play list.

5.Repeat Steps 2 through 4 to program up to

20tracks into your play list. If you previously selected the correct disc, you do not need to repeat Step 2 in order to program additional tracks into your play list.

6.Press the Play c^button (or Ý■■ on remote control) to start play.

7.If you stop play in the middle of the play list so that the program does not appear in the dis- play, the play list will remain stored in memory, but the next press of the Play button c 7 will cause the entire current disc to play. To resume playing the programmed play list, press the CD/Tuner Program button bî, which will bring the program back to the display co.

8.If you program several tracks on the same disc out of order, e.g., Track 8 before Track 7, JBL Soundgear will play the tracks back in the programmed order, even though the Track Number Display dlists the programmed tracks in numbered order.

9.The Disc Skip 36 ïbutton does not oper- ate during programmed play.

10.Random play cannot be selected while a programmed play list is playing.

Reviewing the Contents

of the Play List

While in Stop mode, press the CD/Tuner Program button bîto display the disc num- ber, track number, and program number. Continue to press the CD/Tuner Program but- ton bîto step through the entire play list.

Clearing the Programmed

Play List

There are three different ways to clear a previ- ously programmed play list:

While in Stop mode, press the CD/Tuner Program button bî, and then press the Stop/Reset button 43 *.

Turn off the Power Á1.

Press the CD Open/Close button â.

Adding Tracks to a Previously

Programmed Play List

1.Press the CD/Tuner Program button bî repeatedly to step through the play list until “00” is displayed as the track number c.

2.Select the desired track on the desired disc by pressing the Disc Direct buttons 33 34 35 or Disc Skip button 36 ïas necessary, and then by pressing the CD Skip/Search ÜÜ ÜÜ

¤&or ÝÝ ÝÝ■ ¤(buttons to proceed to the correct track.

3.Press the CD/Tuner Program buttons bî.

Making Changes

to the Play List

1.Press the CD/Tuner Program button bî repeatedly until the disc and track number of the selected step is displayed c. This track will be replaced in the play list by the new track you are about to program.

2.Select the desired track on the desired disc by pressing the Disc Direct buttons 33 34 35 or Disc Skip button 36 ïas necessary, and then by pressing the CD Skip/Search ÜÜ ÜÜ

¤&or ÝÝ ÝÝ■ ¤(buttons to proceed to the correct track.

3.Press the CD/Tuner Program button bî.

It is not possible to delete a single step from the programmed play list.

14

Image 15
Contents N E R ’ S G U I D E O D U C T L I N E J B L S o u n d g e a r S e r i e s N E R ’ S G U I D EJBL Consumer Products Track SkippingTime Display MuteRead first! Important Safety Precautions Front Panel Counter Reset buttonGetting Started Controls and ConnectionsSubwoofer Output jack Rear PanelPlay Mode/Demo button Antenna terminals Aux 2 Input jacksDisplay Volume Level Disc Number indicatorsRemote Control Tape FunctionsCD/Tuner Functions Batteries Remote Control OperationUsing the Remote Control When you are not going to use yourTerminals on the main unit that are External SourcesDigital Outputs LoudspeakersConnections Setting the Clock HeadphonesAntenna Basic Operation Listening to the Radio Enjoying JBL SoundgearOperation Playing CDsProgrammed Play Basic OperationAUX 1 or AUX 2 jacks Using External Playing Tapes Auxiliary SourcesPlayback Tape CounterAux 1/MP3, Aux 2 41 42 Ü35 EquipmentCD Sync Recording Recording From Tape To Tape DubbingAlarm and Timer Setting Advanced FeaturesSetting Sleep TimerTroubleshooting Cassette Deck Specifications SG2020 SG3030System Tuner

SG3030, SG2020 specifications

The JBL SG2020 and SG3030 are two high-performance loudspeakers that reflect JBL's commitment to delivering exceptional audio experiences. As part of JBL's professional series, both models are designed to meet the demands of live sound, studio monitoring, and various other audio applications.

The JBL SG2020 is noted for its compact design, making it an ideal choice for smaller venues or mobile setups. Despite its size, it delivers powerful sound with clarity and precision. The SG2020 features a 20-watt RMS amplifier coupled with a 6.5-inch woofer and a 1-inch tweeter, allowing it to produce a wide frequency response. Its frequency range typically spans from 55Hz to 20kHz, ensuring that both low and high frequencies are represented accurately.

One of the standout technologies in the SG2020 is the proprietary JBL transducer design. This includes advanced magnet structures and voice coils that optimize thermal management, resulting in better performance and reliability during extended use. The speaker also employs a robust cabinet construction that minimizes resonance and adds durability, which is essential for professional applications.

On the other hand, the JBL SG3030 takes performance to another level. Equipped with a more powerful 30-watt RMS amplifier and dual 8-inch woofers along with a 1-inch titanium dome tweeter, the SG3030 is capable of delivering a fuller, richer sound experience. It excels in larger venues and can handle higher sound pressure levels without distortion. Its frequency response extends from 45Hz to 20kHz, making it suitable for a broader range of audio content.

Both the SG2020 and SG3030 come with multiple connectivity options, including XLR and TRS inputs, allowing for versatile integration into any audio setup. They also feature adjustable crossover controls, enhancing their versatility for different applications, whether for music performances or film sound design.

Furthermore, both models incorporate JBL's cutting-edge waveguide technology, which ensures even sound distribution throughout the listening area, reducing dead spots and enhancing the overall audio experience. This technology is particularly beneficial in live sound scenarios where audience coverage is crucial.

In summary, the JBL SG2020 and SG3030 loudspeakers are remarkable advancements in sound technology, combining compact design with powerful audio performance. Their blend of durability, advanced features, and professional-grade sound make them excellent choices for musicians, sound engineers, and audio enthusiasts alike. Whether for studio monitoring or live performance, these models stand out in the JBL lineup, making them valuable assets in any audio environment.