JBL SG2020, SG3030 manual Using External Playing Tapes Auxiliary Sources, Playback, Tape Counter

ENJOYING JBL SOUNDGEAR

Using External				Playing Tapes
(Auxiliary) Sources			Playback		5. Press the Play button c7to begin play-
1. Switch on the auxiliary device (TV, VCR or	JBL Soundgear can only use normal bias tapes.				back. Press the Reverse Play button g@to
					play the reverse side of the tape. The direction
MP3 player) connected to the front or rear	It is equipped with two cassette decks, “A”
					of the tape will be indicated in the display h.
AUX 1 or AUX 2 jacks.	and “B”. Deck A is used only for playback, and
					6. In either the Stop or Play mode, press the
2. Select the desired auxiliary device by repeat-	will stop at the end of each side of the tape.
edly pressing the Aux 1/2 button Ü5.	Deck B may be used for either playback or				Fast Forward ÝÝ ÝÝ■ ¤ ÝÝ9button to
3. See the Recording section on page 16 for	recording, and includes an auto reverse capability				fast forward to the desired point, or to the end
information on tape recording from an auxiliary	which can be controlled with the Play Mode				of the side. The Fast Forward indicator m
source.	button h.				will light in the display.
					To rewind, in either the Stop or Play mode, press
	1. Switch the unit on Á1.				the Rewind ■ÜÜ ÜÜ ¤ ÜÜ #button. The
	2. Open either cassette deck A or B by pressing				Rewind indicator jwill light in the display.
					7. To end playback, press the Stop/Reset
	gently on the door at the Eject position á31 .
	Insert the cassette with the tape side to the bot-				button		43	6.
	tom and the side that you wish to hear facing				Alternatively, the unit will stop automatically at
	the front. Gently push the door to close it.				the	end of the			tape.
	3. Press the Tape A/B button Û)!. If							Tape Counter
	necessary, press the button again to select the
	other deck. JBL Soundgear will display which				The	Tape Counter cwill apppear in the
	deck has been selected cn. The unit will				Information Display when in Tape mode.
	not select a deck that does not have a tape				During Play or Fast Forward, the Tape Counter
	loaded.				cincreases and, during rewind, the tape
	4. Auto reverse (for Deck B only):				counter decreases.
					While in Stop mode or while playing, press the
	Press the Play Mode button h repeatedly to
					Counter Reset button à to reset the counter
	select:
					to zero. This can be convenient for locating the
	• One side	: Unit plays the side that is fac-
					point at which you wish to begin a recording
	ing the listener and stops automatically at the
					session. Note, however, that JBL Soundgear
	end of that side.
					will automatically rewind the tape to its
	• All sides	: Unit plays the front and
					beginning and it will not stop when the
	reverse sides and stops automatically at the
					counter reaches zero.
	end of the tape.
	• Endless loop			: Unit plays both sides of
	tape six times in succession.

JBL Soundgear will display the current Play mode k.

15