Input Right | JBL Speaker System instruction

Input - Simply connect the amplifier's"+"and "-" outputs directly to the red (+)and black (-) input jacks on the back of the enclosure (see diag. 1).

-Since the loudspeakers have a rated ce of 8R each, more than one speaker

usually be wired to one amplifier channel (see See "amplifier impedance load" below.)

ating the Subwoofer SB-2- Treat each input Subwoofer as an 8R loudspeaker and wire into lete system accordingly (see diag. 3). (See er impedance load" below.)

MPLlFlER 4R PER CHANNEL

nEACH CHANNEL

INPUT

RIGHT

aAMPLIFIER 4 0 PER CtiANNEL

REACH CHANNEL

Amplifier Impedance Load - When you connect more than one loudspeaker system to an amplifier channel, either by twisting two wires together at the speaker location or via individual "home runs" from the speakers to the amplifier, the load impedance to the amplifier drops. To find the maximum number of 8R speakers that can be wired in parallel to each channel of your power amplifier, divide 8 by the amplifier's minimum impedance load recommendation(e.g. 8R Control@ speaker + 4R amp's minimum impedance= 2 speakers per channel, see diags. 2 & 3).