Hitachi HUS157373EL3800, HUS157336EL3600, HUS157373EL3600, HUS157336EL3800 Vibration test direction

Page 12

Note 1. Storage capacity does not include spare sector and spare cylinder.

Note 2. This is the value in the case that the drive is formatted to 512 Bytes/sector. (1 gigabyte shows 1x109 bytes on this document.)

Note 3. Ultrastar 15K73 is formatted to 512 Bytes/sector as the default.

If non-512 Bytes/sector is required, customer can change it by re-format of the drive.

Note 4. Data transfer rate is degraded with cable or host condition or electrical noise. Note 5. These specifications are typical under the following conditions:

1.Voltage is 5.0V/12.0V as measured on the edge of drive connector.

2.Surface temperature of HDA is 40°C.

If SCSI commands are issued during start-up (like TEST UNIT READY or REQUEST SENSE) in less than 10 ms intervals, then the start-up time may be extended.

Note 6. The disk drive orientation for vibration test is shown below.

Figure 3.1 Vibration test direction

Test conditions on vibration test are as follows.

(1) Operating

Acceleration frequency : 5 to 400 Hz,

Acceleration level : 9.8m/s2(1.0G)

Sweep rate : 0.5 octave / minute

Test cycle : 1 turn

(2) Non-operating

Acceleration frequency: 5 to 22 Hz, Maximum displacement: 2.56mm

Acceleration frequency: 22 to 400 Hz, Acceleration level: 49m/s2(5.0G)

Sweep rate: 0.5 octave / minute

Test cycle: 1 turn

Drawing No. Sheet No. Revision 5

K6602906

12/46

2003/6/12

Image 12
Contents Scsi OEM ManualK6602906 2003/6/12 Revision ControlGeneral cautions for safety Headline of safety cautionInfluence for environment Safety cautions for this product Warranty and Limited Liability Table of Contents Page Features ModelsStandards and Related Documents Characteristics CharacteristicsDescription K6602906 10/46 2003/6/12Environmental conditions and reliability Environmental conditions and reliabilityK6602906 11/46 2003/6/12 Vibration test direction Shock test direction Power measurement Operating UnitWUltrastar 15K73-73 Ultrastar 15K73-36 IOs per second DC power Interface DC Power RequirementPower supply current Current transition for +12VSpindle Start and Stop Start and Stop Time Start and Stop timePage Connecting Methods Interface Cable Daisy ChainK6602906 18/46 2003/6/12 Page Scsi Interface Page Scsi Commands Supported Mounting and Handling Good case Bad case K6602906 24/46 2003/6/12Mounting dimensions K6602906 25/46 2003/6/12Temperature Limits unit C K6602906 26/46 2003/6/12Precautions for handling Maintenance Interface connectors Physical interfaceInterface cable WIDE, Single-ended mode Interface cable WIDE, LVD modeConnector Layout Wide LVD drive SCA-2 LVD drive Dimension 101.6±0.2535±0.25 50.8±0.5 K6602906 32/46 2003/6/12Pin assignment Pin assignment of Scsi Bus Connector C1 WIDE, LVD mode GND Pin assignment of Scsi Bus Connector C1 SCA-2, LVD mode BSY +BSY ATNPin assignment of Auxiliary Connector C4 Wide LVD drive Pin assignment of Option Jumper Connector C3 Wide LVD driveK6602906 37/46 2003/6/12 NW drive NC drive K6602906 38/46 2003/6/12Jumper Socket setting Jumper connector layout Wide LVD driveJumper connector layout SCA-2 LVD drive SAC-2 LVD driveOption Jumper Connector C3 Scsi ID #Scsi ID Disable Auto Start K6602906 43/46 2003/6/12Force Single-Ended bus mode Enable Delayed StartScsi bus Terminator Power Write ProtectK6602906 45/46 2003/6/12 Extension connector Jumper socketK6602906 46/46 2003/6/12

HUS157373EL3800, HUS157373EL3600, HUS157336EL3600, HUS157336EL3800 specifications

The Hitachi HUS157336EL3600 and HUS157373EL3600, along with the HUS157336EL3800 and HUS157373EL3800, are part of the Hitachi Virtual Storage Platform (VSP) E-series, designed to address the demanding needs of enterprise environments. These high-capacity storage systems are tailored for data-intensive applications, ensuring reliability, performance, and scalability.

A standout feature of the HUS157336EL and HUS157373EL series is their exceptional storage capacity, with the former offering up to 36TB and the latter providing up to 73TB of available storage. This substantial capacity makes them ideal for organizations storing vast amounts of unstructured data, including multimedia files, large databases, and backup solutions.

Both models leverage advanced data protection technologies. Hitachi’s Data Protection Manager (DPM) technology provides robust backup and recovery solutions, enabling businesses to safeguard their critical information effortlessly. Additionally, features like snapshots and replication guarantee data integrity and accessibility, even in the event of hardware failure or accidental deletions.

Performance is another critical aspect. These systems utilize Hitachi’s proprietary Flash of Flash (FoF) technology, which significantly enhances input/output operations per second (IOPS) while minimizing latency. This is particularly beneficial for mission-critical applications that require rapid data retrieval and processing.

Moreover, the HUS157336EL and HUS157373EL series support automated tiering and storage optimization. This allows organizations to manage their storage resources efficiently, moving less frequently accessed data to lower-cost storage media without any disruption to daily operations. This feature not only helps manage costs but also enhances the overall performance of the system.

Both the HUS157336EL3600 and HUS157373EL3600 are built with energy efficiency in mind, featuring power-saving technologies that reduce energy consumption while maintaining top-notch performance. This focus on sustainability aligns with the growing need for organizations to operate environmentally responsibly.

In summary, the Hitachi HUS157336EL3600, HUS157373EL3600, HUS157336EL3800, and HUS157373EL3800 exemplify cutting-edge storage solutions that cater to the needs of modern enterprises. With high capacity, advanced data protection, exceptional performance, automated tiering, and energy efficiency, these systems represent a significant investment in securing and managing critical data assets for businesses across various industries.