StarBoard | Introduction |
1.4 Assembly and Setup
Keep the following points in mind when installing the StarBoard. Select a stable, flat location.
Avoid installing in locations that are dusty, extremely hot, cold, or humid. Also avoid installing in locations exposed to direct sunlight.
1.4.1 Adjusting the Stand
CAUTION
Hold the body firmly and slide the stand slowly when adjusting it.
When adjusting the stand, if you pull up the lever without holding onto the body, the body may move suddenly, resulting in unexpected injuries or damage to the body.
Follow the procedure shown below to adjust the stand.
(1) Pull up the stand lever.