Hitachi 4420 Recommended Resolutions under Windows 9x, Windows, Monitor selection under windows

Recommended Resolutions under Windows 9x, Windows 2000:

All the following modes work within 60-81 Khz Horizontal scan frequency range:

800x600 @ 100 Hz

1024x768 @75, 85, 100		Hz (* recommended mode : 85 Hz)
1152x864 @75, 85, 100		Hz (* recommended mode : 85 Hz)
1280x1024	@60, 70 Hz
1600x1200	@60 Hz	Trial

Also we recommend that you use -,- (negative polarity) for the modes you require to run (not mandatory). 1280x1024 60 hz standard is -,- polarity.

To change the polarity and make other adjustments we recommend powerstrip software:

http://www.entechtaiwan.com

Monitor selection under windows 9x:

You must choose a high refresh type monitor. This is a mandato y equirement.

Under Monitor selections, choose Sony Corp G500 Multiscan to give you all high refresh choices.

If you are using a MIRAGE video card, choose standard monitor type, SuperVGA 1600x1200.
		tw
To change the monitor type:	.
StartàSettingsàControl PanelàDisplayàSettingsàAdvancedàMonitoràChange
	Driver
àNextàDisplay a list of all the drivers in a specific location so you can select the Drivers you
	.com

wantàShow all Hardware àManufactures : choose Sony CorpàModels: choose Sony GDM- 500psàNextàNextàFinish

.zeon

Running the monitor on MIRAGE Video Cards:
	PDF
Zeon	www

To get video cards which run all the modes (including Cmos setup, DOS, VGA, Games,....and high resolutions) on this monitor please visit :

www.mirage-mmc.com