JBL SCS1455BK, SCS145.5 manual Dolby PRO Logic NON-DIGITAL Line Level

Page 7

DOLBY DIGITAL OR DTS

(OR OTHER DIGITAL SURROUND MODE) CONNECTION

RECEIVERSUBWOOFER

LINE LEVEL IN

L

LFE OUT

LFE INPUT

R

Use this installation method for Dolby Digital, DTS or other digital surround processors:

Use the line-level input jack marked “LFE” for the Low- Frequency Effects channel.

Connect this jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure that you have configured your surround sound processor for “Subwoofer On.” The receiver should be config-

ured for 5.1-channel operation, and the front left, front right, center and rear speakers should all be set to “Small.” If your receiver allows you to set the cross- over frequency between the subwoofer and the main speakers, select either 120Hz or 150Hz, or select the set- ting that is the closest fre- quency below these.

DOLBY PRO LOGIC (NON-DIGITAL) – LINE LEVEL

Use this installation method for Dolby Pro Logic appli- cations (not Dolby Digital, DTS or other digital process- ing), where the receiver/ processor is equipped with a subwoofer output, or a

volume-controlled preamp (line-) level output:

Use RCA-type interconnects to connect the line-level subwoofer outputs on your receiver or amplifier to the line-level inputs on the sub- woofer. IMPORTANT: Do not

use the LFE input on the sub- woofer with Dolby Pro Logic processors. NOTE: If your receiver or amplifier only has one subwoofer output jack, then you will need to use a Y-connector (not included). Plug the male end of the Y- connector into your receiver or amplifier’s subwoofer out- put jack, and connect each

+

–

 

 

+

–

 

 

+

–

 

 

 

 

 

 

 

 

+

–

 

 

+

–

 

 

 

 

 

 

+

–

 

 

 

 

 

 

 

+

–

+

–

 

 

 

 

+

–

 

 

 

 

+

–

 

of the two female ends to separate RCA-type intercon- nects. Finally, plug the RCA- type interconnects into the line-level inputs on the sub- woofer.

Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure your receiver or processor is correctly con- figured to indicate that the subwoofer is “On.”

Note for advanced users: If your receiver/processor has a built-in low-pass crossover filter for the subwoofer out- put, you may use the LFE input to bypass the sub- woofer’s internal crossover.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OWNER’S Guide Read First Important Safety PrecautionsIncluded Thank YOU for Choosing JBLJBL Consumer Products Surround Speakers Speaker PlacementFront Center Channel Speakers SubwooferMounting the Satellites on Optional FS1000 Floor Stands Mounting OptionsSatellites and Surrounds WALL-MOUNTINGConnection Tips Speaker ConnectionsTerminal Dolby PRO Logic NON-DIGITAL Line Level Dolby PRO Logic NON-DIGITAL Speaker Level Operation VolumeReview proper operation of your receiver/amplifier TroubleshootingTurn off all electronics If there is no sound from the surround speakers PRO Sound SpecificationsComes Home

SCS1455BK, SCS145.5 specifications

The JBL SCS145.5 and SCS1455BK are exceptional home theater speaker systems designed to deliver an immersive audio experience in any living space. These speaker systems combine innovative technologies and impressive design, making them a favorite among audio enthusiasts and casual listeners alike.

One of the standout features of the SCS145.5 and SCS1455BK is their versatile speaker configuration. Each system typically consists of a pair of compact satellite speakers, a center channel speaker, and a powerful subwoofer. This setup allows for a surround sound experience that captures the full range of audio from movies, music, and video games, ensuring that every nuance is heard.

The speakers are engineered with JBL’s renowned sound quality in mind. They utilize advanced driver technologies that provide precise audio reproduction. The satellite speakers feature high-frequency drivers that deliver crisp highs, while the woofers produce robust midrange frequencies. The center channel speaker is especially crucial for clear dialogue delivery, making movie watching more enjoyable. The subwoofer, often the heart of any home theater setup, is designed to provide deep, impactful bass that adds depth to audio experiences.

Both models come with attractive and contemporary aesthetics, featuring sleek finishes that blend seamlessly with modern home decor. The SCS145.5 is available in a classic black finish, catering to a wide audience looking for a sophisticated look without sacrificing performance.

In terms of installation and usability, the JBL SCS145.5 and SCS1455BK speakers are designed for ease of setup. They include integrated mounting systems, enabling users to place the satellite speakers on walls or shelves with minimal hassle. The subwoofer is typically compact enough to fit in various places without compromising sound quality.

The system is compatible with a wide range of audio equipment, connecting easily to AV receivers, televisions, and other audio sources. This flexibility makes it a great choice for anyone looking to enhance their home entertainment setup, whether for films, music, or gaming.

Overall, the JBL SCS145.5 and SCS1455BK offer an exceptional balance of performance, style, and versatility. With their high-quality sound reproduction, easy installation, and attractive design, these speaker systems are perfect for anyone looking to elevate their audio experience. Whether in a small apartment or a large home theater setup, JBL ensures that customers receive the ultimate in sound quality and an engaging listening experience.
Top Page Image Contents