Hitachi CP-SX5500W manual Requesting projector status Get command

Page 32

TECHNICAL (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.

•Provide an interval of at least 40ms between the response code and any other code.

•The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

•Commands are not accepted during warm-up.

TECHNICAL - 7

TECHNICAL

Downloaded from www.Manualslib.com manuals search engine

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CP-SX5500W Contents Before USE FeaturesContents of package Before USE Part NamesENGLISH-4 Loading the Batteries Installation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of system setup Power on Power OFFOperations Equipment is used safelyBasic Operation Description OperationsBasic Operation Normal menu Setup Menu Setup MenuAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input Menu DescriptionImage Menu Image MenuOptions Menu Options Menu DescriptionNo Signal Menu No Signal MenuOperation Start/Stop Press Operation Start/Stop Press the or buttonMaintenance LampLamp Lamp LifeReplacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessagesTroubleshooting Indicators MessageIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy 11,15Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals Connection to the Mouse Control PS/2, ADB or Serial MouseUSB Mouse PS/2 MouseADB Mouse Serial MouseCommunications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-SX5500W specifications

The Hitachi CP-SX5500W is a high-performance projector designed to meet the needs of various professional and educational environments. With its advanced features and cutting-edge technologies, this projector stands out for its ability to deliver superior image quality, ease of use, and robust performance.

One of the primary features of the CP-SX5500W is its brightness. With 5,500 lumens, this projector ensures vibrant and clear images even in well-lit rooms. This characteristic makes it particularly suitable for classrooms, conference rooms, and large venues where ambient light can be a challenge. Coupled with a high contrast ratio of 3000:1, the projector produces sharp and vivid images, enhancing the overall viewing experience.

The resolution of the CP-SX5500W is another significant aspect. It features a native XGA resolution of 1024x768 pixels, which allows for excellent detail in presentations, graphs, and videos. The projector is also compatible with various screen resolutions, including WXGA and SXGA+, ensuring versatility in different setups.

Technology plays a critical role in the performance of the CP-SX5500W. It utilizes 3LCD technology, which helps in delivering bright and colorful images, reducing the "rainbow effect" often associated with single-chip DLP projectors. This technology also ensures that colors appear natural and accurate, which is essential for professional presentations.

Another noteworthy characteristic of the CP-SX5500W is its flexibility in connectivity options. It comes with a range of input ports, including HDMI, VGA, and USB, allowing for easy connection to various devices such as laptops, Blu-ray players, and USB flash drives. Additionally, the projector supports wireless presentations, facilitating cable-free setups that enhance mobility and convenience.

The design of the projector also enhances its usability. It features an easy-to-navigate menu and a remote control, making it user-friendly for individuals of all technical backgrounds. Its compact size and lightweight construction allow for easy transport, making it an ideal choice for traveling professionals and educators.

Moreover, the Hitachi CP-SX5500W is designed with durability in mind. It incorporates advanced lamp technology, which extends the lamp’s life up to 5,000 hours in eco mode, reducing maintenance costs and downtime. This reliability makes it a suitable investment for organizations that demand consistent performance.

In conclusion, the Hitachi CP-SX5500W is a powerful and versatile projector that excels in delivering high-quality images in diverse environments. With its impressive brightness, excellent resolution, advanced 3LCD technology, and flexible connectivity options, it serves as an ideal solution for professionals and educators seeking a dependable projection system.
Top Page Image Contents