INSTALLATION (continued)
Cabling
Refer to the table below for connecting each terminal of the projector to each device.
Table 2. Cabling
Function | Terminal | Cable | |
|
|
| |
Analog RGB input | RGB IN 1 | Accessory RGB cable or optional RGB | |
| |||
RGB IN 2 | |||
| cable with | ||
|
| inch thread screws | |
Analog RGB output | RGB OUT | ||
| |||
|
|
| |
DVI input | DVI | Optional DVI cable with inch thread screws | |
|
|
| |
| RGB AUDIO IN [RGB 1 / DVI] |
| |
Audio input | (interlocked with RGB IN 1 or DVI) | Optional audio cable with stereo mini jack | |
| |||
(from the computer) | RGB AUDIO IN [RGB 2] | ||
| |||
|
| ||
| (interlocked with RGB IN 2) |
| |
|
|
| |
PS/2 mouse control |
| Accessory PS/2 mouse cable | |
|
|
| |
ADB mouse control | CONTROL | Optional ADB mouse cable | |
|
| ||
Serial mouse control | Optional Serial mouse cable | ||
| |||
|
|
| |
| Optional | ||
|
|
| |
USB mouse control | USB | Optional USB cable | |
|
|
| |
Optional | |||
jack | |||
|
| ||
|
|
| |
Video input | VIDEO | Accessory video/audio cable | |
|
|
| |
| COMPONENT VIDEO [Y] |
| |
|
|
| |
Component video input | COMPONENT VIDEO [CB/PB] | Accessory component video cable | |
|
|
| |
| COMPONENT VIDEO [CR/PR] |
| |
|
|
| |
Audio input | AUDIO [L / MONO] | Accessory video/audio cable or optional | |
| |||
(from video equipment) | AUDIO [R] | audio cable with RCA jack | |
|
| ||
|
|
| |
Audio output | AUDIO OUT | Optional audio cable with stereo mini jack | |
|
|
|
ENGLISH
CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.
•Before connecting, turn off to all devices to be connected, except for the USB cable.
•The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.
NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.
•Secure the screws on the connectors and tighten.
•For some RGB input modes, the optional Mac adapter is necessary.
•To select the DVI input, the computer may need some settings. See the manuals of the computer for details.
•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
•Refer to the “TECNICAL” section for the pin assignment of connectors and
•When the DVI terminal is used, the RGB OUT terminal may not function.
Downloaded from www.Manualslib.com manuals search engine